Jan,
Here is my config that is allowing both start and stop accounting packages to the system.
it is currently doing radius authentication as well. Most likely I will be setting the
authentication to by Mysql
with just the accounting going to FreeRadius or possibly XTradius in the future.
Steve
#
# $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc","log_level",1)
modparam("acc","radius_flag",1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
if (method =="INVITE" | method == "BYE")
{
log(1,"INVITE or BYE\n");
setflag(1);
};
if (method=="MESSAGE") {
log(1,"MESSAGE\n");
setflag(1);
};
if (method=="BYE"){
log (1, "BYEd or CANCEL\n");
setflag(1);
};
if (method=="CANCEL"){
log (1, "BYEe or CANCEL\n");
setflag(1);
};
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri=~"sip.solaas.com") {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!radius_www_authorize("")) {
www_challenge("", "0");
break;
};
save("location");
break;
};
if (uri=~"^sip:[0-9]*@sip.solaas.com") {
setflag(1);
log("forwarding to PSTN");
prefix("xxxx");
t_relay_to_udp("xxx.xxx.xxx.xxx","5060");
break;
};
# native SIP destinations are handled using our USRLOC DB
/* if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
*/
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
Jan Janak wrote:
Please send me the whole config file.
Jan.
On 26-09 12:11, Steven R. Bunin wrote:
> Hi all,
>
> I have successfully gotten radius authentication working and I started getting
Radius Start records for accounting but I am not sure what I am doing wrong in regards to
getting radius Stop records.
>
> Below is the area I believe has the most affect on Radius Acccounting from my Log
File. Any suggestions would be appreciated and if it would help to see the full Config
file I will send it as well.
>
>
> record_route();
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!radius_www_authorize("")) {
> www_challenge("", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> if (method =="INVITE")
> {
> log(1,"INVITE\n");
> setflag(1);
> };
> if (method=="MESSAGE") {
> log(1,"MESSAGE\n");
> setflag(1);
> };
> if (method=="BYE"){
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
> if (method=="CANCEL"){
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
>
> Thanks in advance,
>
> Steve
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
>
http://lists.iptel.org/mailman/listinfo/serusers
--
Steven R. Bunin - Managing Partner
SOLAAS LLC
10 East 39th Street
Suite 1125
New York, NY 10016
(+001) 212-532-6700
Cellular: 646-739-7000
Fax (+001) 212-532-6776
http://www.solaas.com
--
This e-mail may contain confidential and/or privileged information. If you are not the
intended recipient (or have received this e-mail in error) please notify the sender
immediately and destroy this
e-mail. Any unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.