26 Aug
2004
26 Aug
'04
12:07 a.m.
Hi Jiri,
enclosed find the requested files:
a new ser log file with the ser.cfg file.
I set the parameter "fork=no".
I could not set "fork==1" or "fork=1" as requested.
The result is that ser cannot correctly start,
i.e. "sertctl start" hangs at the following log file
position ("serctl start" does not come back to the
command line):
2(9767) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
After pressing CTRL-C ser shuts down and frees memory.
This effect only happens with "fork=no".
With "fork=yes" I receive one ser process starting all
the required child processes.
Best regards,
Peter
-----Ursprungliche Nachricht-----
Von: Jiri Kuthan [mailto:jiri@iptel.org]
Gesendet: Mittwoch, 25. August 2004 19:37
An: Peter Herre; serusers(a)lists.iptel.org
Betreff: Re: AW: [Serusers] No mem for sip_msg
Unfortunately I have no idea what the cause can be (at least not
yet). It is very surprising that one of very first pkg_malloc
called fails. Perhaps an error in the database or the database
reader that causes some insane huge memory waste?
What is the logs in the case that SER does not start with
fork==1?
If that does not give us any clues, you will have to recompile
in memory debugging mode, set debugging level high and we will
then have to review what happens during allocations.
Thanks for reporting.
-jiri
At 02:56 PM 8/25/2004, Peter Herre wrote:
Hi Jiri,
thank you for your quick reply.
The mentioned error occurs after each single SIP message,
even right after starting ser.
There is no load on the SIP server, there is just one SIP
user who wants to log on SER by sending the appropriate
request.
This request works fine with my SER, as long as I leave
database access disabled. As soon as I enable database
access, the mentioned error occurs.
More detailed information follows:
operating system:
=================
Linux voip 2.6.5-7.104-default #1 Wed Jul 28 16:42:13 UTC 2004
i686 athlon i386 GNU/Linux
ser distribution:
=================
ser-0.8.14_src.tar.gz
modified config.h file:
/*used only if PKG_MALLOC is defined*/
#define PKG_MEM_POOL_SIZE 10240*1024
/*used if SH_MEM is defined*/
#define SHM_MEM_SIZE 64
ser build:
==========
version: 0.8.14 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM,
SHM_MM
AP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SI
ZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $
main.c compiled on 23:59:48 Aug 24 2004 with gcc 3.3
ser config file:
================
see enclosed ser.cfg
ser log file at loglevel 8:
===========================
see enclosed ser.log
However, it is worth mentioning that my ser cannot be started if the
ser.cfg
parameter "fork" is set to "no":
The ser process starts and immediately
after
the start it closes itself at that point where usually the child processes
are started in a "fork=yes" scenario.
Best regards,
Peter
-----Ursprungliche Nachricht-----
Von: Jiri Kuthan [mailto:jiri@iptel.org]
Gesendet: Mittwoch, 25. August 2004 14:28
An: Peter Herre; serusers(a)lists.iptel.org
Betreff: Re: [Serusers] No mem for sip_msg
At 11:57 AM 8/25/2004, Peter Herre wrote:
--
Jiri Kuthan http://iptel.org/~jiri/
Dear ser users,
I have a similar problem like Joseph Rork:
I have ser 0.8.14 with mysql 4.0.
Without DB access, ser handles all SIP requests.
With enabled DB access, I receive the following
error message when a SIP request comes in:
receive_msg: no mem for sip_msg
How much time and traffic does it take for this error to occur?
BTW: there are guidelines for complete problem reporting at
http://www.iptel.org/ser/problems/
-jiri
As posted in September 2003, I increased both
the shared memory to 64 MB and PKG_MEM_POOL_SIZE
to 10240*1024, but the error remained.
Beside this, I also added 256 MB physical RAM.
Do have any other ideas what I could change?
Best regards,
Peter
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/