Re: [Users] record_route_preset(): No memory left

Hi Bastian, I made a fast overview/testing and I found no problem with record_route_preset() function. Are you calling it directly from script or from another module....the bogus length may by due an invalid param. regards, bogdan Bastian Schern wrote: > Hi Bogdan, > > I compiled OpenSER with memory debugging and all other settings you > recommend to me. After that I got the following debug output: > > --- snip --- > [...] > 0(31223) xl_printf: final buffer length 125 > 0(31223) Wed Feb 1 00:31:43 2006: > <sip:00045977408@sipbase.de>;tag=77lh74wsus : record_route_preset( > "217.160.188.74:5060;nat=yes" ) > 0(31223) qm_malloc(0x8114d40, 32) called from data_lump.c: > anchor_lump(351) > 0(31223) qm_malloc(0x8114d40, 32) returns address 0x815a390 frag. > 0x815a378 (size=32) on 1 -th hit > 0(31223) qm_malloc(0x8114d40, 1074638763) called from record.c: > record_route_preset(373) > 0(31223) record_route_preset(): No memory left > 0(31223) parse_headers: flags=200 > [...] > --- snip --- > > It looks like qm_malloc tries to allocate 1074638763 Bytes (1024 MB). > I think this is really strange! > > In the memory dump I don't see something strange. > > Regards > Bastian > > > Bogdan-Andrei Iancu schrieb: > >> Hi, >> >> look like something is not right - please compile the memory debug >> support (in Makefile.defs set DBG_QM_MALLOC define and remove >> F_MALLOC - Note: you need to recompile everything). >> >> run in no fork mode with debug=9 and wait for the error to appear. >> first, see how much memory the malloc tries to grab. >> second, hit the process with SIGUSR1 to force memory dump - see if >> there is something strange there. >> >> regards, >> bogdan >> >> Bastian Schern wrote: >> >>> Bogdan-Andrei Iancu schrieb: >>> >>>> Hi Bastian, >>>> >>>> looks like you openser runs out of private memory (pkg memory) - >>>> this may happen either because of insufficient mem, either due a >>>> mem leak. >>>> >>>> Does is happens after running for a long time? or quite soon after >>>> start? >>>> >>> >>> It will occur quite soon after starting OpenSER. >>> >>> >>>> first try to increase the pkg memory - see config.h file, the >>>> PKG_MEM_POOL_SIZE define. By default, the size is of 1 M. If the >>>> problem persists, please report back. >>>> >>> >>> I changed PKG_MEM_POOL_SIZE to 2*1024*1024 but it is still the same. >>> Is it still to low? >>> >>> Regards >>> Bastian >>> >>> >>>> regards, >>>> bogdan >>>> >>>> Bastian Schern wrote: >>>> >>>>> Hello to all, >>>>> >>>>> I'm using the latest CVS 1_0_0 and I got the following message in >>>>> the log after a "record_route_preset( >>>>> "213.191.xxx.xxx:5060;nat=yes" )": >>>>> >>>>> record_route_preset(): No memory left >>>>> >>>>> Why this comes? >>>>> >>>>> Regards >>>>> Bastian >>>>