3 Jun
2004
3 Jun
'04
6:40 a.m.
hello janak,
this is my radius client dictionary file
iam using
#
# Updated 97/06/13 to livingston-radius-2.01
miquels(a)cistron.nl
#
# This file contains dictionary translations for
parsing
# requests and generating responses. All
transactions are
# composed of Attribute/Value Pairs. The value
of each attribute
# is specified as one of 4 data types. Valid
data types are:
#
# string - 0-253 octets
# ipaddr - 4 octets in network byte order
# integer - 32 bit value in big endian order
(high byte first)
# date - 32 bit value in big endian order -
seconds since
# 00:00:00 GMT,
Jan. 1, 1970
#
# Enumerated values are stored in the user file
with dictionary
# VALUE translations for easy administration.
#
# Example:
#
# ATTRIBUTE VALUE
# --------------- -----
# Framed-Protocol = PPP
# 7 = 1 (integer encoding)
#
#
# Following are the proper new names. Use these.
#
ATTRIBUTE User-Name 1 string
ATTRIBUTE Password 2 string
ATTRIBUTE CHAP-Password 3 string
ATTRIBUTE NAS-IP-Address 4 ipaddr
ATTRIBUTE NAS-Port-Id 5
integer
ATTRIBUTE Service-Type 6
integer
ATTRIBUTE Framed-Protocol 7
integer
ATTRIBUTE Framed-IP-Address 8 ipaddr
ATTRIBUTE Framed-IP-Netmask 9 ipaddr
ATTRIBUTE Framed-Routing 10
integer
ATTRIBUTE Filter-Id 11 string
ATTRIBUTE Framed-MTU 12
integer
ATTRIBUTE Framed-Compression 13
integer
ATTRIBUTE Login-IP-Host 14 ipaddr
ATTRIBUTE Login-Service 15
integer
ATTRIBUTE Login-TCP-Port 16
integer
ATTRIBUTE Reply-Message 18 string
ATTRIBUTE Callback-Number 19 string
ATTRIBUTE Callback-Id 20 string
ATTRIBUTE Framed-Route 22 string
ATTRIBUTE Framed-IPX-Network 23 ipaddr
ATTRIBUTE State 24 string
ATTRIBUTE Class 25 string
ATTRIBUTE Vendor-Specific 26 string
ATTRIBUTE Session-Timeout 27
integer
ATTRIBUTE Idle-Timeout 28
integer
ATTRIBUTE Termination-Action 29
integer
ATTRIBUTE Called-Station-Id 30 string
ATTRIBUTE Calling-Station-Id 31 string
ATTRIBUTE NAS-Identifier 32 string
ATTRIBUTE Proxy-State 33 string
ATTRIBUTE Login-LAT-Service 34 string
ATTRIBUTE Login-LAT-Node 35 string
ATTRIBUTE Login-LAT-Group 36 string
ATTRIBUTE Framed-AppleTalk-Link 37
integer
ATTRIBUTE Framed-AppleTalk-Network 38
integer
ATTRIBUTE Framed-AppleTalk-Zone 39 string
ATTRIBUTE Acct-Status-Type 40
integer
ATTRIBUTE Acct-Delay-Time 41
integer
ATTRIBUTE Acct-Input-Octets 42
integer
ATTRIBUTE Acct-Output-Octets 43
integer
ATTRIBUTE Acct-Session-Id 44 string
ATTRIBUTE Acct-Authentic 45
integer
ATTRIBUTE Acct-Session-Time 46
integer
ATTRIBUTE Acct-Input-Packets 47
integer
ATTRIBUTE Acct-Output-Packets 48
integer
ATTRIBUTE Acct-Terminate-Cause 49
integer
ATTRIBUTE Acct-Multi-Session-Id 50 string
ATTRIBUTE Acct-Link-Count 51
integer
ATTRIBUTE Event-Timestamp 55
integer
ATTRIBUTE CHAP-Challenge 60 string
ATTRIBUTE NAS-Port-Type 61
integer
ATTRIBUTE Port-Limit 62
integer
ATTRIBUTE Login-LAT-Port 63
integer
ATTRIBUTE Connect-Info 77 string
#
# RFC3162 IPv6 attributes
#
ATTRIBUTE NAS-IPv6-Address 95 string
ATTRIBUTE Framed-Interface-Id 96 string
ATTRIBUTE Framed-IPv6-Prefix 97 string
ATTRIBUTE Login-IPv6-Host 98 string
ATTRIBUTE Framed-IPv6-Route 99 string
ATTRIBUTE Framed-IPv6-Pool 100 string
#
# Experimental Non Protocol Attributes used by
Cistron-Radiusd
#
ATTRIBUTE Huntgroup-Name 221 string
ATTRIBUTE User-Category 1029 string
ATTRIBUTE Group-Name 1030 string
ATTRIBUTE Simultaneous-Use 1034
integer
ATTRIBUTE Strip-User-Name 1035
integer
ATTRIBUTE Fall-Through 1036
integer
ATTRIBUTE Add-Port-To-IP-Address 1037
integer
ATTRIBUTE Exec-Program 1038 string
ATTRIBUTE Exec-Program-Wait 1039 string
ATTRIBUTE Hint 1040 string
#
# Non-Protocol Attributes
# These attributes are used internally by the
server
#
ATTRIBUTE Expiration 21 date
ATTRIBUTE Auth-Type 1000
integer
ATTRIBUTE Menu 1001 string
ATTRIBUTE Termination-Menu 1002 string
ATTRIBUTE Prefix 1003 string
ATTRIBUTE Suffix 1004 string
ATTRIBUTE Group 1005 string
ATTRIBUTE Crypt-Password 1006 string
ATTRIBUTE Connect-Rate 1007
integer
#
# Integer Translations
#
# User Types
VALUE Service-Type Login-User
1
VALUE Service-Type Framed-User
2
VALUE Service-Type
Callback-Login-User 3
VALUE Service-Type
Callback-Framed-User 4
VALUE Service-Type Outbound-User
5
VALUE Service-Type
Administrative-User 6
VALUE Service-Type
NAS-Prompt-User 7
# Framed Protocols
VALUE Framed-Protocol PPP
1
VALUE Framed-Protocol SLIP
2
# Framed Routing Values
VALUE Framed-Routing None
0
VALUE Framed-Routing Broadcast
1
VALUE Framed-Routing Listen
2
VALUE Framed-Routing
Broadcast-Listen 3
# Framed Compression Types
VALUE Framed-Compression None
0
VALUE Framed-Compression
Van-Jacobson-TCP-IP 1
# Login Services
VALUE Login-Service Telnet
0
VALUE Login-Service Rlogin
1
VALUE Login-Service TCP-Clear
2
VALUE Login-Service PortMaster
3
# Status Types
VALUE Acct-Status-Type Start
1
VALUE Acct-Status-Type Stop
2
VALUE Acct-Status-Type Alive
3
VALUE Acct-Status-Type Accounting-On
7
VALUE Acct-Status-Type Accounting-Off
8
# Authentication Types
VALUE Acct-Authentic RADIUS
1
VALUE Acct-Authentic Local
2
VALUE Acct-Authentic PowerLink128
100
# Termination Options
VALUE Termination-Action Default
0
VALUE Termination-Action RADIUS-Request
1
# NAS Port Types, available in 3.3.1 and later
VALUE NAS-Port-Type Async
0
VALUE NAS-Port-Type Sync
1
VALUE NAS-Port-Type ISDN
2
VALUE NAS-Port-Type ISDN-V120
3
VALUE NAS-Port-Type ISDN-V110
4
# Acct Terminate Causes, available in 3.3.2 and
later
VALUE Acct-Terminate-Cause User-Request
1
VALUE Acct-Terminate-Cause Lost-Carrier
2
VALUE Acct-Terminate-Cause Lost-Service
3
VALUE Acct-Terminate-Cause Idle-Timeout
4
VALUE Acct-Terminate-Cause
Session-Timeout 5
VALUE Acct-Terminate-Cause Admin-Reset
6
VALUE Acct-Terminate-Cause Admin-Reboot
7
VALUE Acct-Terminate-Cause Port-Error
8
VALUE Acct-Terminate-Cause NAS-Error
9
VALUE Acct-Terminate-Cause NAS-Request
10
VALUE Acct-Terminate-Cause NAS-Reboot
11
VALUE Acct-Terminate-Cause Port-Unneeded
12
VALUE Acct-Terminate-Cause Port-Preempted
13
VALUE Acct-Terminate-Cause Port-Suspended
14
VALUE Acct-Terminate-Cause
Service-Unavailable 15
VALUE Acct-Terminate-Cause Callback
16
VALUE Acct-Terminate-Cause User-Error
17
VALUE Acct-Terminate-Cause Host-Request
18
#
# Non-Protocol Integer Translations
#
VALUE Auth-Type Local
0
VALUE Auth-Type System
1
VALUE Auth-Type SecurID
2
VALUE Auth-Type Crypt-Local
3
VALUE Auth-Type Reject
4
#
# Cistron extensions
#
VALUE Auth-Type Pam
253
VALUE Auth-Type Accept
254
#
# Experimental Non-Protocol Integer Translations
for Cistron-Radiusd
#
VALUE Fall-Through No
0
VALUE Fall-Through Yes
1
VALUE Add-Port-To-IP-Address No
0
VALUE Add-Port-To-IP-Address Yes
1
#
# Configuration Values
# uncomment these two lines to turn account
expiration on
#
#VALUE Server-Config
Password-Expiration 30
#VALUE Server-Config
Password-Warning 5
#
# $Id: dictionary.ser,v 1.2 2003/09/11 22:05:08 janakj
Exp $
#
# SIP RADIUS attributes
#
# Schulzrinne indicates attributes according to
# draft-schulzrinne-sipping-radius-accounting-00
#
# Sterman indicates attributes according to
# draft-sterman-aaa-sip-00
#
# Standard indicates a standard RADIUS attribute
# which is missing in radiusclient dictionary
#
# Digest indicates attributes according to
#
# Proprietary indicates an attribute that hasn't
# been standardized
#
### acc ###
ATTRIBUTE Sip-Method 101 integer
# Schulzrinne
ATTRIBUTE Sip-Response-Code 102 integer
# Schulzrinne
ATTRIBUTE Sip-Cseq 103 string
# Schulzrinne
ATTRIBUTE Sip-To-Tag 104 string
# Schulzrinne
ATTRIBUTE Sip-From-Tag 105 string
# Schulzrinne
ATTRIBUTE Sip-Branch-Id 106 string
# Schulzrinne
ATTRIBUTE Sip-Translated-Req-ID 107 string
# Schulzrinne
ATTRIBUTE Sip-Source-Ip-Address 108 ipaddr
# Schulzrinne
ATTRIBUTE Sip-Source-Port 109 integer
# Schulzrinne
VALUE Service-Type Sip-Session 15
# Schulzrinne
### auth_radius ###
# Sip-Session service type is already defined in acc
section
VALUE Service-Type Call-Check 10
# Standard
VALUE Service-Type Emergency-Call 13
# Proprietary
ATTRIBUTE Digest-Response 206 string
# Sterman
ATTRIBUTE Digest-Attributes 207 string
# Sterman
ATTRIBUTE Sip-Uri-User 208 string
# Proprietary
ATTRIBUTE Sip-Rpid 213 string
# Proprietary
ATTRIBUTE Digest-Realm 1063 string
# Sterman
ATTRIBUTE Digest-Nonce 1064 string
# Sterman
ATTRIBUTE Digest-Method 1065 string
# Sterman
ATTRIBUTE Digest-Uri 1066 string
# Sterman
ATTRIBUTE Digest-Qop 1067 string
# Sterman
ATTRIBUTE Digest-Algorithm 1068 string
# Sterman
ATTRIBUTE Digest-Body-Digest 1069 string
# Sterman
ATTRIBUTE Digest-Cnonce 1070 string
# Sterman
ATTRIBUTE Digest-Nonce-Count 1071 string
# Sterman
ATTRIBUTE Digest-User-Name 1072 string
# Sterman
### group_radius ###
VALUE Service-Type Group-Check 12
# Proprietary
ATTRIBUTE Sip-Group 211 string
# Proprietary
### uri_radius ###
# Call-Check service type is already define in
auth_radius
--- Jan Janak <jan(a)iptel.org> wrote:
The dictionary the radiusclient library is using is
probably malformed,
please post the dictionary here, including changes
you have made
(radiuslient dictionary, not radius server if they
are different).
Jan.
On 30-05 22:56, varala ramakanth wrote:
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
hello friends,
i have installed free radius server-0.9.3 and
radius
client-0.3.2
and followed the ser howto
radtest is success full
and i updated dictionary of radius client with of
in
web
available dictionary.ser ( of sip related
attributies>
and i included statement of INCLUDE <path of
dicionary.ser>
when i start radiusd -x its givens error as
Errors reading dictionary: dict_init:
/usr/local/etc/raddb/dictionary[23]: Couldn't open
dictionary "
/usr/local/etc/raddb/dictionary.ser": No such file
or
directory
Errors reading radiusd.conf
so i gone to "/usr/local/share/freeradius/"
path and appended whole dictionary.ser contets
into it
and also kept link as INclude dictinary.ser
even though if i create packet "digest"
User-Name = "test", Digest-Response =
"631d6d73147add2f9e437f59bbc3aeb7",
Digest-Realm = "testrealm", Digest-Nonce =
"1234abcd"
,
Digest-Method = "INVITE", Digest-URI =
"sip:5555551212@example.com",
Digest-Algorithm = "MD5", Digest-User-Name =
"test"
and run with
root@/usr/local/src# radclient -f digest localhost
auth <shared_secret>
it s giveng error as
radclient:No token read where we expected an
attribute
name
i checked both in client and server
dictionary attributes are present for the all that
which are included in the pakcet.
if include only
User-Name = "test",User-Password="test" in the
digest
> packet
>
> and check it s sucessfull so what may be the wrong
> sip method digest packet
>
>
> please help me
>
> with regards
> rama kanth
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Friends. Fun. Try the all-new Yahoo! Messenger.
> http://messenger.yahoo.com/
>
> _______________________________________________
> Serhelp mailing list
> serhelp(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serhelp