17 Jul
2022
17 Jul
'22
7:54 a.m.
Hi Matteo,
I remember to had a similar setup and it wasn’t a problem for me.
I did have this the configuration running with an older version of Kamailio 5.2 or so but
I did configure the following for the path module on the edge proxy:
/* ----- path params ------------------------------------------------------- */
modparam("path", "use_received", 1)
modparam("path", "enable_r2", 1)
modparam("path", "received_format", 1)
route [CALLER_NAT_DETECT] {
force_rport();
if (nat_uac_test("27")) {
if (is_method("REGISTER")) {
add_path_received();
} else if (is_first_hop()) {
set_contact_alias();
}
setflag(FLT_NATS);
} else if (is_method("REGISTER")) {
add_path();
}
}
And on the registrar:
modparam("registrar", "path_mode", 1)
modparam("registrar", "path_use_received", 1
It was from an old setups but maybe it does help.
Greetings
Rick
On 17. Jul 2022, at 11:05, matteo brancaleoni
<mbrancaleoni(a)gmail.com> wrote:
Hello,
I'm trying to setup the following scenario with sip ping:
UAC -> Kamailio Edge -> Kamailio Registrar
Edge proxy is a multihomed proxy with public/private ips and the registrar is a kamailio
on a private network. The edge acts as a nat proxy and loadbalancer.
Edge proxy inserts a Path header (and contact alias) which get correctly saved on
registrar usrloc. Registration works as expected.
Now, since I need to keep nat open towards the uacs and expire them when they're not
reachable anymore, I'm trying to send sip pings from the registrar via the edge proxy.
I'm using nathelper sipping in the registrar.
What I see is that the registrar sends out a sip options putting in the Route header the
Path as expected, but the sip packet gets sent directly to the UAC contact and not via the
edge, as the Route header specifies.
After looking into the nathelper code, it seems that the sip packet is sent via udp
directly without any specific routing. So the question: it should work what I'm trying
to achieve? Maybe not?
Probably I can work around it setting the ;received in the contact on registrar (it will
set to the edge proxy) and since the contact is aliased on the edge when the edge receives
an option from the registrar it can process the alias and send it to the correct endpoint,
but seems a workaround?
Or using the keepalive module maybe, even if that means setting specific timers and
manually do what the nathelper module already does?
Any hint?
Thanks,
Matteo
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users