10 Aug
2011
10 Aug
'11
10:32 a.m.
Hi Daniel,
please find the attached diff files and the files patched.
Best Regards,
Laura
On Tue, Aug 9, 2011 at 4:34 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com> wrote:
Hi Laura,
thanks for the patches. I will apply them. Can you attach the patches as
files instead of pasting them inline, so I can just download them from email
and apply? The mail client breaks the withe-spacing and will take me some
time to align them.
Cheers,
Daniel
On 8/8/11 6:00 PM, laura testi wrote:
Thank you very much for your reply.
Finally we have successfully configure the xmpp gateway to work (both
presence and IM) with another kamailio server which provide SIP
REGISTRAR/PROXY/PRESENCE (with integrated xcap function).
The key points are to put the server address parameter of presence and
pua_xmpp module to the gateway itself instead of the main Presence
Server of the SIP/SIMPLE domains. But the outbound_proxy of the xmpp
module must point to the main PROXY server of the SIP/SIMPLE domains.
The outbound_proxy of pua is not specify, so it point itself.
following are this part of the configuration:
modparam("xmpp", "outbound_proxy",
"<main_proxy_uri>")
modparam("presence", "server_address",
"sip:10.10.5.210:5060")
modparam("pua_xmpp", "server_address",
"sip:10.10.5.210:5060")
Now it works fine withe some bugs:
- xmpp add sip contact: ok
- sip add xmpp contact: ok
- xmpp see the sip contact presence: ok
- sip see the xmpp contact presence: ok
- sip IM to xmpp: ok
- xmpp IM to sip: ok
the bugs we found are following:
- the online/offline status is ok in both direction (SIP<--> XMPP)
- other status (away/busy) is not ok from XMPP to SIP
- busy status is not ok from SIP to XMPP
- each time XMPP contact change the status, triger a new SUBSCRIBE in xmpp
gateway which generate multiple same subscriptions with different callid
in both active_watchers and pua tables. This also makes multiple
multiple NOTIFY
generation from the main Presence Server to GW when the SIP contact
change
it's status
We have make the following patches in the pua_xmpp module that fix the
above bugs. Hope it can help.
-------------------------------------------------------------------------------------------------------------------------
# diff -u simple2xmpp.c.orig simple2xmpp.c
--- simple2xmpp.c.orig 2011-08-05 16:11:55.000000000 +0200
+++ simple2xmpp.c 2011-08-08 14:57:25.000000000 +0200
@@ -87,7 +87,7 @@
if(msg->to->parsed != NULL)
{
pto = (struct to_body*)msg->to->parsed;
- LM_ERR("'To' header ALREADY
PARSED:<%.*s>\n",pto->uri.len,pto->uri.s);
+ LM_DBG("'To' header ALREADY
PARSED:<%.*s>\n",pto->uri.len,pto->uri.s);
}
else
{
@@ -415,7 +415,8 @@
goto error;
}
- if(xmlStrcasecmp((unsigned char*)note, (unsigned char*)"away")==
0)
+ if((xmlStrcasecmp((unsigned char*)note, (unsigned char*)"away")==
0)||
+ (xmlStrcasecmp((unsigned char*)note, (unsigned
char*)"On the phone")== 0))
{
new_node = xmlNewChild(xmpp_root, NULL, BAD_CAST "show",
BAD_CAST "away");
@@ -456,12 +457,14 @@
LM_ERR("while adding node:
idle\n");
goto error;
}
- }
- else */
+ }*/
+ else
if((xmlStrcasecmp((unsigned char*)note,
(unsigned char*)"dnd")== 0)||
(xmlStrcasecmp((unsigned
char*)note,
- (unsigned char*)"do
not disturb")== 0))
+ (unsigned char*)"do
not disturb")== 0)||
+ (xmlStrcasecmp((unsigned
char*)note,
+ (unsigned char*)"Busy (DND)")==
0))
{
new_node =
xmlNewChild(xmpp_root, NULL, BAD_CAST "show",
BAD_CAST "dnd");
@@ -471,6 +474,8 @@
goto error;
}
}
+ else
+ LM_DBG("Not Found Status\n");
/* adding status node */
-------------------------------------------------------------------------------------------------------------------------
# diff -u xmpp2simple.c.orig xmpp2simple.c
--- xmpp2simple.c.orig 2011-08-05 12:37:48.000000000 +0200
+++ xmpp2simple.c 2011-08-08 15:51:56.000000000 +0200
@@ -76,13 +76,13 @@
{
LM_DBG("type attribut not present\n");
build_publish(pres_node, -1);
- if(presence_subscribe(pres_node, 3600, XMPP_SUBSCRIBE)<
0)
+ /* if(presence_subscribe(pres_node, 3600, XMPP_SUBSCRIBE)<
0)
{
LM_ERR("when sending subscribe for
presence");
xmlFree(pres_type);
goto error;
}
-
+ */
/* send subscribe after publish because in xmpp
subscribe message
* comes only when a new contact is inserted in buddy list
*/
@@ -161,6 +161,8 @@
char* type= NULL;
char* status= NULL;
+
+
LM_DBG("start\n");
entity=(char*)pkg_malloc(7+ strlen(uri)*sizeof(char));
@@ -243,13 +245,13 @@
if(show_cont)
{
if(strcmp(show_cont, "xa")== 0)
- status= "not available";
+ status= "Away";
else
if(strcmp(show_cont, "chat")== 0)
- status= "free for chat";
+ status= "Online";
else
if(strcmp(show_cont, "dnd")== 0)
- status= "do not disturb";
+ status= "Busy (DND)";
else
status= show_cont;
}
@@ -264,8 +266,8 @@
goto error;
}
*/
- node = xmlNewChild(root_node, NULL, BAD_CAST "note",
- BAD_CAST status_cont);
+ node = xmlNewChild(tuple_node, NULL, BAD_CAST "note",
+ BAD_CAST status);
if(node== NULL)
{
LM_ERR("while adding node\n");
@@ -273,8 +275,8 @@
}
}else
if(show_cont)
- {
- node = xmlNewChild(root_node, NULL, BAD_CAST
"note",
+ {
+ node = xmlNewChild(tuple_node, NULL, BAD_CAST
"note",
BAD_CAST status);
if(node== NULL)
{
@@ -295,23 +297,6 @@
goto error;
}
}
- node= xmlNewChild(person_node, NULL, BAD_CAST
"activities",
- BAD_CAST 0);
- if(node== NULL)
- {
- LM_ERR("while adding node\n");
- goto error;
- }
-
-
- if( xmlNewChild(person_node, NULL, BAD_CAST "note",
- BAD_CAST status )== NULL)
- {
- LM_ERR("while adding node\n");
- goto error;
- }
-
-
}
On Mon, Aug 1, 2011 at 12:10 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com> wrote:
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 7/29/11 10:32 AM, laura testi wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi all,
we are trying to setup a kamailio presence server in SIP/SIMPLE domain
to interwork with XMPP domains including the GTalk (see the config
below). The architecture is like this:
- SIP/SIMPLE server: kamailio3.14 with full configuration with XCAP
integration
- XMPP Gateway: another kamailio server + ejabberd server
- component mode
- xmpp moduleL: outbound proxy to the Kamailio SIP/SIMPLE server
- pua_xmpp: no outbound proxy?
- XMPP server: ejabberd
The users from XMPP domain can add the SIP account and see the
presence of the SIP users, but not vice versa. The chat from both
directions works fine.
in the Presence Server, we have configured the kamailio with XCAP
integration. We have the following doubts:
- does pua_xmpp/pua modules need the xcap integration for the presence
integration with xmpp domains?
no, there is no requirement of xcap for sip-xmpp presence gatewaying.
because to use xcap for presence authorization rules, it needs the
sip clients support the xcap
- does pua_xmpp/pua support xcap? otherwise how to works?
This mechanism of auth rules in SIP is not compatible with XMPP, afaik.
In
xmpp they have in-band (using XMPP) transfer of the buddy list, unlike in
SIMPLE where is XCAP over HTTP -- it is more like end-to-end presence
model
from early sip specifications.
- in case of multiple SIP/SIMPLE presence server,
how we can configure
the server_address of
pua_xmpp and presence parameter in xmpp gw?
Either use many instances or, as workaround, somehow route the traffic to
itself or other instance in order to re-write some headers.
Cheers,
Daniel
Can you help us to clarify the doubts please?
Many thanks in advanced!
Best Regards,
Laura
PS: following are the main configuration of the xmpp GW:
---------------------------------------------------------------------------------------------
...
modparam("xmpp", "domain_separator", "*")
modparam("xmpp", "backend", "component")
modparam("xmpp", "gateway_domain", "<mygwdomain>")
modparam("xmpp", "xmpp_domain", "<mygwdomain>")
modparam("xmpp", "xmpp_host", "127.0.0.1")
modparam("xmpp", "xmpp_password", "secret")
modparam("xmpp", "outbound_proxy", "<my oubound proxy
uri>")
modparam("pua", "outbound_proxy", "<my outbound proxy
uri>")
modparam("pua", "update_period", 60)
modparam("pua", "default_expires", 1200)
modparam("presence", "server_address", "<my presence server
uri>")
modparam("pua_xmpp", "server_address", "<my presence server
uri>")
route{
route(REQINIT);
t_check_trans();
if (uri =~ "sip:.+@.*<myxmppdomain>") {
route(PRESENCE);
if ($rU==$null)
{
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
route(CHAT);
}
xlog("L_INFO", "*** xmpp: unhandled message type\n");
t_reply("503", "Service unavailable");
return;
}
...
route[CHAT] {
if(!is_method("MESSAGE"))
return;
if (!t_newtran()) {
sl_reply_error();
exit;
}
xlog("L_INFO", "*** xmpp-handled MESSAGE message.");
if ($cT=~"^text/plain") {
if (xmpp_send_message()) {
t_reply("200", "Accepted");
} else {
t_reply("404", "Not found");
}
} else {
xlog("L_INFO", "*** xmpp-handled MESSAGE, ignoring not
text
messages");
t_reply("200", "Accepted");
}
t_release();
exit;
}
route[PRESENCE] {
if(!is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
return;
# create new transaction to catch retransmissions
if (!t_newtran())
{
sl_reply_error();
exit;
}
if( is_method("NOTIFY"))
{
xlog("L_INFO", "*** xmpp-handled NOTIFY message.");
if(pua_xmpp_notify())
t_reply("200", "OK");
t_release();
exit;
} else if( is_method("SUBSCRIBE"))
{
xlog("L_INFO", "*** xmpp-handled SUBSCRIBE
message.\n");
handle_subscribe();
if($(hdr(Event))== "presence")
{
pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");
}
t_release();
exit;
} else if(is_method("PUBLISH"))
{
handle_publish();
t_release();
exit;
}
}
...
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda