19 Oct
2007
19 Oct
'07
10:17 p.m.
Hi,
I am using John's example below to build a list and push to ruri.
The problem I'm running into is how to handle the offline subscriber
or a failure from one of the contacts so that it does not block
trying rest of the contacts. I guess I am looking for a true
parallel forking where as I'm seeing sequential processing on the list.
if (avp_db_query("select username from usr_preferences
where username <> $fU and attribute='pick_grp' and value=$avp
(s:pick_grp)","$avp(s:pick_grp_list)")) {
avp_pushto("$ruri/username","$avp(s:pick_grp_list)/g");
route(17);
}
route[17] {
if (lookup("location")) { # currently online
registered UA.
t_relay();
return;
} else { # not online
if (does_uri_exist() { # but exists
# send to voicemail
}
};
After this db lookup the ruri has user1@mydomain, user2@mydomain
etc... I don't want to re-route it back to my proxy and really just
want to do the lookup and relay it to the contacts directly. Since,
in my case, user1, user2, etc are not registered with the same AOR,
lookup is being done for each user and if user1 is offline, the
processing ends there.
Any advice on this is greatly appreciated.
--
Zahid
On Feb 8, 2007, at 7:39 AM, Bogdan-Andrei Iancu wrote:
Hi,
if you need something dynamic based on AVPs, see the previous reply
from John Peters (same thread).
regards,
bogdan
raviprakash sunkara wrote:
Hi Bogdan,
Good Morning,
I'm Also Do the Same part,
Suppose Some My Subscriber's are wanted the Pickup or group ring
for them,
For simple static routing is not needed,
THen How Can I do ? for my more Subscriber listers,
Is I need to the use AVPOPS modules ,,,,,,,,,,,,,,,
Help me !
On 2/8/07, *Bogdan-Andrei Iancu* <bogdan(a)voice-system.ro
<mailto:bogdan@voice-system.ro>> wrote:
Hi,
or you need a very, very simple static routing, just use
append_branch() :
#replace current uri with first destination
seturi("sip:u1@host");
#add the next destinations as branches
append_branch("sip:u2@host");
append_branch("sip:u3@host ");
regards,
bogdan
John Peters wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users Hi
For parallel forking or group ringing, you can use
avp_db_load. For
example:
if (avp_db_load("$ruri/username", "$avp(s:cfu)/forward")) {
xlog("cfu: $avp(s:cfu)\n.");
avp_pushto("$ruri", "$avp(s:cfu)/g");
};
Use the "g" option to add all URIs. I believe you may also be
able
to
set it statically like:
modparam("avpops","avp_aliases","myGroup=i:665")
avp_write("sip:u1@host", "$myGroup");
avp_write(" sip:u2@host", "$myGroup");
avp_pushto("$ruri", "$myGroup/g");
And of course, if multiple endpoints are configured to use
the same
account and username, by default that account
will ring to all
those
contacts.
On 2/7/07, *Stefano Capitanio* <s.capitanio(a)caspur.it
<mailto:s.capitanio@caspur.it>
<mailto:s.capitanio@caspur.it
<mailto:s.capitanio@caspur.it>>>
wrote:
Hi list,
is it possible to set a Pickup-Group in openser?
what i want is that a call directed for example to
sip:voip@isp.it
<mailto:sip:voip@isp.it>
<mailto: sip
<mailto:sip>:voip@isp.it <mailto:voip@isp.it>>
is forwarded to two different users, let's say
tech_assistance1(a)isp.it <mailto:tech_assistance1@isp.it>
<mailto:tech_assistance1@isp.it <mailto:tech_assistance1@isp.it>>
and tech_assistance2(a)isp.it
<mailto:tech_assistance2@isp.it>
<mailto: tech_assistance2(a)isp.it
<mailto:tech_assistance2@isp.it>> (in
parallel)
maybe I can use "rewriteuser" and "append_brach" but I can'
find the
right way!
thank you for any help,
Stefano