27 Aug
2012
27 Aug
'12
12:08 p.m.
Hello,
I am not sure it supports right now sending from the same socket, but it
should send back to same ip and port from where it received the command.
A patch it might be required to get it like that, so far I don't
remember anyone willing to get such thing.
Btw, another alternative, you can eventually use sercmd with ctl module
-- it works also over tcp (as well as udp). You can run any MI command
via 'mi', like:
sercmd ... mi address_dump
Look at sercmd -h for the options.
So you don't need to build a script around nc.
Cheers,
Daniel
On 8/27/12 11:21 AM, phillman25 wrote:
Thanks for the info Daniel.
I have implemented mi_datagram module and defined it with the
following parameters:
modparam("mi_datagram", "socket_name", "udp:2.2.2.2:8033
<http://2.2.2.2:8033>")
When i run the below command from a remote server:
echo -ne ":address_dump:\n\n" | nc -w 1 -u 2.2.2.2 8033
i don't receive an output, but when i monitor all traffic on the local
machine:
ngrep -q -t -P "" -W byline -d any host 2.2.2.2 and udp
i observe the output:
U 2012/08/27 12:41:36.735094 1.1.1.1:55621 <http://1.1.1.1:55621> ->
2.2.2.2:8033 <http://2.2.2.2:8033>
:address_dump:
U 2012/08/27 12:41:36.735201 2.2.2.2:47024 <http://2.2.2.2:47024> ->
1.1.1.1:55621 <http://1.1.1.1:55621>
200 OK
71 <1, xx.xx.xx.xx, 0> [1]
72 <1, yy.yy.yy.yy, 0> [4]
Seems like the command is accepted from remote server and executed on
local machine but not relayed back to the remote server. Looks like
mi_datagram replies on different port other than 8033. Is there a way
to force the reply on source port 8033?
Thanks
Phillip
On Mon, Aug 27, 2012 at 9:58 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
if you want to execute from a remote server, maybe it is better to
use mi_datagram or xmlrpc modules to run MI/RPC commands.
Cheers,
Daniel
On 8/22/12 12:02 PM, phillman25 wrote:
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Dear List
I am trying to run the below command from a REMOTE server where i
use Cacti to graph all my data. I am trying to graph on a per
trunk basis.
kamctl fifo profile_get_size trunk | awk -F '=' '{print $4}'
This command yields an output on the local server.
Could someone perhaps point me in the right direction?
Thanks!
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>
-http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -http://asipto.com/u/kat