[Serusers] SER MySQL + NAT problems

Hi Would mind sending your ser.cfg file, i am facing problems with NAT traversal I have already read > <http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/Co> okbook_D2/ but it still does not working This is my ser.cfg file: Is there anything wrong whit it? # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/nathelper.so" # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # We will you flag 6 to mark NATed contacts modparam("registrar", "nat_flag", 6) # Enable NAT pinging modparam("nathelper", "natping_interval", 60) # Ping only contacts that are known to be # behind NAT modparam("nathelper", "ping_nated_only", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # special handling for NATed clients; first, nat test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding used); also, # the received test should, if complete, should check all # vias for presence of received if (nat_uac_test("3")) { # allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart smart enough to be symmetric. In some phones, like # it takes a configuration option. With Cisco 7960, it is # called NAT_Enable=Yes, with kphone it is called # "symmetric media" and "symmetric signaling". (The latter # not part of public released yet.) fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("200.151.192.13", "subscriber")) { www_challenge("200.151.192.13", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } # # Forcing media relay if necessary # route[1] { if (uri=~"[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; if (isflagset(6)) { force_rtp_proxy(); t_on_reply("1"); append_hf("P-Behind-NAT: Yes\r\n"); }; if (!t_relay()) { sl_reply_error(); break; }; } onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; } Thanks Paulo _________________________________________________________________ MSN Messenger: converse online com seus amigos . http://messenger.msn.com.br