1 Sep
2022
1 Sep
'22
3:06 p.m.
Hi, did you look at the documentation of algorithm 13 ?
The priority is used in combination with the latency to determine the
preferred gateway.
Once you confirm that this is what you want "latency latency optimized
dispatching", we can help to clarify why and how this may not work as
expected.
Regards
https://kamailio.org/docs/modules/devel/modules/dispatcher.html
-
“13” - latency optimized dispatching
- The algorithm will load balance using round-robin prioritizing the
gateways with the highest priority.
- If ds_ping_latency_stats is active the algorithm will adjust the priority
of the gateway automatically, the priority will be lowered by 1 point every
time the latency ms is as high as the priority.
- If the attribute 'cc=1' is set, the latency used is congestion ms :
estimate (current latency ms) - average (normal condition latency ms).
*Example 1.46. latency_optimized_dispatching usage*
Using this simple formula :
ADJUSTED_PRIORITY = PRIORITY - (ESTIMATED_LATENCY_MS/PRIORITY)
GATEWAY | PRIORITY | ESTIMATED | ADJUSTED | LOAD
# | | LATENCY | PRIORITY | DISTRIBUTION
1 | 30 | 21 | 30 | 33%
2 | 30 | 91 | 27 | 0%
3 | 30 | 61 | 28 | 0%
4 | 30 | 19 | 30 | 33%
5 | 30 | 32 | 29 | 0%
6 | 30 | 0 | 30 | 33%
7 | 30 | 201 | 24 | 0%
With congestion control the formula becomes :
CONGESTION_MS = CURRENT_LATENCY_MS - NORMAL_CONDITION_LATENCY_MS
ADJUSTED_PRIORITY = PRIORITY - (CONGESTION_MS/PRIORITY)
-
On Thu, Sep 1, 2022 at 2:38 AM Pyry Aaltonen <pyry.aaltonen(a)cuuma.com>
wrote:
Hello,
I’m quite new user with kamailio (heard first time about it a year ago and
joined the list yesterday) and now wondering how the xavp_dst should work.
I had read from the documentation that
”The first XAVP is the current selected destination.”
I use ds_select_dst with alg 13. And my kamailio version is kamailio 5.5.3
(x86_64/linux)
So when my dispatcher list is like (I have also tried to differ the
priority value like 10 and 1, but doesn’t make difference)
10 sip:1.2.3.4;transport=tcp 10 1 type=type1
10 sip:4.3.2.1;transport=tcp 10 1 type=type2
If one of the destinations fails (dx/ip), and it happens to be the one
with higher priority or the one that just gets higher position in the
dispatcher list if the prio Is equal.
My xavp_$xavp(dsdst=>attrs) get null value. And, if I try to seek
$(xavp(dsdst[0]=>attrs) or $(xavp(dsdst[1]=>attrs) I also got nothing.
If both destinations are up with equal priority, it selects them with
round-robin, and the xavp_$xavp(dsdst=>attrs) has the type value of the
selected destination as expected, also the $(xavp(dsdst[0]=>attrs) or
$(xavp(dsdst[1]=>attrs) contains the destinations so that the selected is
0 and the other is at position 1.
The $du is updated as I expect so if one fails the other one is selected
always, why the xavp_dst isn’t working same way, or am I missing something?
If needed I’ll try to provide more information,
Thanks already in advance
-Pyry
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users