Re: [SR-Users] sr-users Digest, Vol 176, Issue 11

11 Jan 2020

Sorry to have bothered everyone.  But the following is the correct usage.
I had a typo a line above that was showing as being in this line.

$avp(techprefix) = $(rU{s.select,0,#});

On Sat, Jan 11, 2020 at 9:00 AM Sam Ware &lt;sam.ware(a)gmail.com&gt; wrote:

...
  Alex,

 I get the following error

 ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
 ERROR: bad config file (1 errors)
 CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config
 file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-40: Can't
 get from cache: $(rU{s.select,0,#)

 David,

 I did try escaping and get the same error.

 $avp(techprefix) = $(rU{s.select,0,\#});

 additionally,  I think I initially tried it double quoted.

 $avp(techprefix) = $(rU{s.select,0,"#"});

 Resulted in:
 ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
 ERROR: bad config file (1 errors)
 CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config
 file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-42: Can't
 get from cache: $(rU{s.select,0,"#")

 Here is the entire block.

     if ($rU =~ "[\*\#]") {
         xlog("L_INFO",
 "[$ci] -> $rU appears to have a tech prefix, processing...\n");
         if ($rU =~ "\*") {
             $avp(techprefix) = $(rU{s.select,0,*});
             ## Reset the RURI user to the non-tech prefix'ed value
             $rU = $(rU{s.select,1,*});

 ## Overwrite the message source variable with "sourceip-techprefix"
             $var(messagesource) = $_s($si-$avp(techprefix));
         } else if ($rU =~ "\#")  {
             $avp(techprefix) = $(rU{s.select,0,#)});
             ## Reset the RURI user to the non-tech prefix'ed value
             $rU = $(rU{s.select,1,#});

 ## Overwrite the message source variable with "sourceip-techprefix"
             $var(messagesource) = $_s($si-$avp(techprefix));
         }
     }

 On Sat, Jan 11, 2020 at 5:00 AM &lt;sr-users-request(a)lists.kamailio.org&gt;
 wrote:

  Send sr-users mailing list submissions to
         sr-users(a)lists.kamailio.org

 To subscribe or unsubscribe via the World Wide Web, visit
         https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
 or, via email, send a message with subject or body 'help' to
         sr-users-request(a)lists.kamailio.org

 You can reach the person managing the list at
         sr-users-owner(a)lists.kamailio.org

 When replying, please edit your Subject line so it is more specific
 than "Re: Contents of sr-users digest..."
 Today's Topics:

    1. Re: Kamailio in Docker Compile Error (Sergey Safarov)
    2. Re: Kamailio in Docker Compile Error (Sam Ware)
    3. Kamailio 5.2.2 IMS -enum_query question (Woscek, Martin W.)
    4. String Transformation Question (Sam Ware)
    5. Re: String Transformation Question (Alex Balashov)
    6. Re: String Transformation Question (David Villasmil)

 ---------- Forwarded message ----------
 From: Sergey Safarov &lt;s.safarov(a)gmail.com&gt;
 To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Cc:
 Bcc:
 Date: Fri, 10 Jan 2020 14:38:02 +0300
 Subject: Re: [SR-Users] Kamailio in Docker Compile Error
 please try kamailio-ci:5.3.2-alpine
 I will fix error about kamailio-ci:5.3.1-alpine.

 On Fri, Jan 10, 2020 at 1:53 PM Asgaroth &lt;00asgaroth00(a)gmail.com&gt; wrote:

  Hi,

 I see that the kamailio-ci:5.3.1-alpine tag exists, but was getting an
 error when trying to pull it 2 days ago, 5.3.0- alpine works fine.

 Unfortunately I cannot post the actual docker pull error right now (in
 airport, on my phone)

 On Fri 10 Jan 2020, 08:32 Sergey Safarov, &lt;s.safarov(a)gmail.com&gt; wrote:

  yum -y install yum-utils
 yum-config-manager --add-repo http://rpm.kamailio.org/centos/kamailio.repo
 yum install kamailio

 Also you can use this docker image
 https://hub.docker.com/repository/docker/kamailio/kamailio-ci

 On Fri, Jan 10, 2020 at 10:58 AM Daniel-Constantin Mierla <
 miconda(a)gmail.com&gt; wrote:

> Hello,
>
> try to install which and pkg-config tools.
>
> Cheers,
> Daniel
> On 10.01.20 02:21, Sam Ware wrote:
>
> I am attempting to create my own docker image on Centos 7.  During the
> build, I get the following error message during the "make all" phase.
> ----------------------------------------------------------------------
> CC (gcc) [kamailio]             core/cfg.tab.o
> LD (gcc) [kamailio]             kamailio
> make[1]: which: Command not found
> make[1]: which: Command not found
> make[1]: which: Command not found
> make[1]: which: Command not found
> make[1]: which: Command not found
> make[1]: which: Command not found
> CC (gcc) [M db_mysql.so]                km_dbase.o
> km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
>  #include <mysql.h>
>                    ^
> compilation terminated.
> make[1]: *** [km_dbase.o] Error 1
> make: *** [modules] Error 1
>
> ------------------------------------------------------------------------
>
> I checked and the mysql.h exists in the /usr/include/mysql directory.
>
> Any thoughts?
>
> FYI, here is my Dockerfile
>
> FROM centos:7
> MAINTAINER “Sam D Ware” sware(a)o1.com
> ENV container docker
> RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i
> == systemd-tmpfiles-setup.service ] || rm -f $i; done);
> RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
>     && rm -rf /etc/systemd/system/.wants/ \
>     && rm -rf /lib/systemd/system/local-fs.target.wants/ \
>     && rm -f /lib/systemd/system/sockets.target.wants/udev \
>     && rm -f /lib/systemd/system/sockets.target.wants/initctl \
>     && rm -rf /lib/systemd/system/basic.target.wants/ \
>     && rm -f /lib/systemd/system/anaconda.target.wants/*
> VOLUME [ “/sys/fs/cgroup”]
> RUN yum -y install epel-release
> RUN yum -y update
> RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
> RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
> WORKDIR /usr/local/src/
> RUN git clone --depth 1 --no-single-branch
> https://github.com/kamailio/kamailio kamailio
> WORKDIR /usr/local/src/kamailio/
> RUN git checkout -b 5.3 origin/5.3
> RUN make cfg
> COPY modules.lst /usr/local/src/kamailio/src/
> RUN make all
> RUN make install
> RUN groupadd kamailio
> RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio"
> --home /var/run/kamailio kamailio
> RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig
> /etc/sysconfig/kamailio
> COPY kamailio.service /etc/systemd/system/kamailio.service
> RUN yum clean all; systemctl enable kamailio
> CMD ["/usr/sbin/init"]
>
> --
> Sam  D Ware
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
 _______________________________________________
 Kamailio (SER) - Users Mailing List
 sr-users(a)lists.kamailio.org
 https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
  _______________________________________________
 Kamailio (SER) - Users Mailing List
 sr-users(a)lists.kamailio.org
 https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

 ---------- Forwarded message ----------
 From: Sam Ware &lt;sam.ware(a)gmail.com&gt;
 To: miconda(a)gmail.com
 Cc: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Bcc:
 Date: Fri, 10 Jan 2020 07:23:46 -0600
 Subject: Re: [SR-Users] Kamailio in Docker Compile Error
 Thanks Daniel,

 That got me past that hurdle.  It was the "which".  Looks like the
 pkg-config tools was already install; probably a preq for one of the other
 pkgs.

 Sam

 On Fri, Jan 10, 2020 at 1:58 AM Daniel-Constantin Mierla <
 miconda(a)gmail.com&gt; wrote:

  Hello,

 try to install which and pkg-config tools.

 Cheers,
 Daniel
 On 10.01.20 02:21, Sam Ware wrote:

 I am attempting to create my own docker image on Centos 7.  During the
 build, I get the following error message during the "make all" phase.
 ----------------------------------------------------------------------
 CC (gcc) [kamailio]             core/cfg.tab.o
 LD (gcc) [kamailio]             kamailio
 make[1]: which: Command not found
 make[1]: which: Command not found
 make[1]: which: Command not found
 make[1]: which: Command not found
 make[1]: which: Command not found
 make[1]: which: Command not found
 CC (gcc) [M db_mysql.so]                km_dbase.o
 km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
  #include <mysql.h>
                    ^
 compilation terminated.
 make[1]: *** [km_dbase.o] Error 1
 make: *** [modules] Error 1
 ------------------------------------------------------------------------

 I checked and the mysql.h exists in the /usr/include/mysql directory.

 Any thoughts?

 FYI, here is my Dockerfile

 FROM centos:7
 MAINTAINER “Sam D Ware” sware(a)o1.com
 ENV container docker
 RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i ==
 systemd-tmpfiles-setup.service ] || rm -f $i; done);
 RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
     && rm -rf /etc/systemd/system/.wants/ \
     && rm -rf /lib/systemd/system/local-fs.target.wants/ \
     && rm -f /lib/systemd/system/sockets.target.wants/udev \
     && rm -f /lib/systemd/system/sockets.target.wants/initctl \
     && rm -rf /lib/systemd/system/basic.target.wants/ \
     && rm -f /lib/systemd/system/anaconda.target.wants/*
 VOLUME [ “/sys/fs/cgroup”]
 RUN yum -y install epel-release
 RUN yum -y update
 RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
 RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
 WORKDIR /usr/local/src/
 RUN git clone --depth 1 --no-single-branch
 https://github.com/kamailio/kamailio kamailio
 WORKDIR /usr/local/src/kamailio/
 RUN git checkout -b 5.3 origin/5.3
 RUN make cfg
 COPY modules.lst /usr/local/src/kamailio/src/
 RUN make all
 RUN make install
 RUN groupadd kamailio
 RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home
 /var/run/kamailio kamailio
 RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig
 /etc/sysconfig/kamailio
 COPY kamailio.service /etc/systemd/system/kamailio.service
 RUN yum clean all; systemctl enable kamailio
 CMD ["/usr/sbin/init"]

 --
 Sam  D Ware

 _______________________________________________
 Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

 --
 Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
 Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com

 --
 Sam  D Ware

 ---------- Forwarded message ----------
 From: "Woscek, Martin W." &lt;mwoscek(a)mitre.org&gt;
 To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Cc:
 Bcc:
 Date: Fri, 10 Jan 2020 16:57:29 +0000
 Subject: [SR-Users] Kamailio 5.2.2 IMS -enum_query question

 Hi,

 I am trying to invoke unum lookups from calls to enum_query()
 ,is_from_user_enum() and  enum_pv_query().

 However we are not seeing any enum lookups over the wire using wireshark.

 In the Kamailio.cfg the following are set:

 loadmodule "enum"

 modparam("enum", "domain_suffix", "mydnsserver.org.")

 modparam("enum", "i_enum_suffix", " mydnsserver.org.")

 sample use in our Kamailio.cfg file:

 if(!enum_query("mydnsserver.org.")) {

                 xlog(“….);

                 #do something

 } else {

                 Xlog(“….”)

                 #do something else

 }

 I do see NAPTR lookups being done by the other Kamailio IMS processes
 initially when it starts up so I know it has connectivity to the DNS
 server, but none for the invoked enum queries.

 We are running Kamailio 5.2.2.

 Thanks,

 Martin

 ---------- Forwarded message ----------
 From: Sam Ware &lt;sam.ware(a)gmail.com&gt;
 To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Cc:
 Bcc:
 Date: Fri, 10 Jan 2020 17:22:17 -0600
 Subject: [SR-Users] String Transformation Question
 We are receiving traffic with a tech prefix.  We want to be able to use a
 # (hash tag) for the separator for the tech prefix and the remote user
 ($rU).  I was using the s.select transformation before when using * for
 separator, but I get an error because it appears that it being interpreted
 as a comment.  Any suggestions?

 Example:
 ## How I was doing it with the *
 $avp(techprefix) = $(rU{s.select,0,*});

 ## How I tried and got an error for the hash tag
 $avp(techprefix) = $(rU{s.select,0,#});
 --
 Sam  D Ware

 ---------- Forwarded message ----------
 From: Alex Balashov &lt;abalashov(a)evaristesys.com&gt;
 To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Cc:
 Bcc:
 Date: Fri, 10 Jan 2020 18:24:44 -0500
 Subject: Re: [SR-Users] String Transformation Question
 What’s the error?

 —
 Sent from mobile, with due apologies for brevity and errors.

 On Jan 10, 2020, at 6:23 PM, Sam Ware &lt;sam.ware(a)gmail.com&gt; wrote:

 We are receiving traffic with a tech prefix.  We want to be able to use a
 # (hash tag) for the separator for the tech prefix and the remote user
 ($rU).  I was using the s.select transformation before when using * for
 separator, but I get an error because it appears that it being interpreted
 as a comment.  Any suggestions?

 Example:
 ## How I was doing it with the *
 $avp(techprefix) = $(rU{s.select,0,*});

 ## How I tried and got an error for the hash tag
 $avp(techprefix) = $(rU{s.select,0,#});
 --
 Sam  D Ware

 _______________________________________________
 Kamailio (SER) - Users Mailing List
 sr-users(a)lists.kamailio.org
 https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

 ---------- Forwarded message ----------
 From: David Villasmil &lt;david.villasmil.work(a)gmail.com&gt;
 To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt;
 Cc:
 Bcc:
 Date: Fri, 10 Jan 2020 23:24:51 +0000
 Subject: Re: [SR-Users] String Transformation Question
 Have you tried scaping it? Never done it, tho

 On Fri, 10 Jan 2020 at 23:23, Sam Ware &lt;sam.ware(a)gmail.com&gt; wrote:

  We are receiving traffic with a tech prefix.  We
want to be able to use
 a # (hash tag) for the separator for the tech prefix and the remote user
 ($rU).  I was using the s.select transformation before when using * for
 separator, but I get an error because it appears that it being interpreted
 as a comment.  Any suggestions?

 Example:
 ## How I was doing it with the *
 $avp(techprefix) = $(rU{s.select,0,*});

 ## How I tried and got an error for the hash tag
 $avp(techprefix) = $(rU{s.select,0,#});
 --
 Sam  D Ware

 _______________________________________________
 Kamailio (SER) - Users Mailing List
 sr-users(a)lists.kamailio.org
 https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
  --
 Regards,

 David Villasmil
 email: david.villasmil.work(a)gmail.com
 phone: +34669448337
 _______________________________________________
 sr-users mailing list
 sr-users(a)lists.kamailio.org
 https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

 --
 Sam  D Ware

-- 
Sam  D Ware

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Re: [SR-Users] sr-users Digest, Vol 176, Issue 11