Hello,
please keep the mainling list cc-ed.
Calling ds_select_dst() first in the main route block is not really a good
place. First you have to handle sanity checks, within dialog requests a.s.o.
Of course it is a matter of your purpose, but as general hint, selecting the
destination should be done just (or as close as possible) before relaying.
If you take default config and you have only load balancing, then you can
replace location lookup part with load balancing. Other parts may be
stripped as well, just giving some direction here.
Cheers,
Daniel
On 9/28/11 11:11 PM, Henrik Aagaard Sørensen wrote:
That did the job.
I just placed the ds_select_dst-code at the very first thing after route{
Thank you for your help!
2011/9/28 Daniel-Constantin Mierla <miconda(a)gmail.com>
Hello,
the devel version of dispatcher module README has a different config
example, maybe it helps you more:
http://kamailio.org/docs/modules/devel/modules_k/dispatcher.html#id2522847
I am considering to update it again soon to be a bit more complete and
follow the structure of the default config file shipped with kamailio.
Cheers,
Daniel
On 9/28/11 6:30 PM, Henrik Aagaard Sørensen wrote:
Hi Carsten.
The configuration works. It's actually where (which line) in the
configuration I should put:
ds_select_dst("1", "0");
:) I'm not strong in Kamailio and just want it to load balance between
Freswitch servers. So I have a basic installation of Kamailio, without
MySQL, NAT, Auth etc.
On Wed, Sep 28, 2011 at 5:09 PM, Carsten Bock <carsten(a)ng-voice.com>
wrote:
Hi,
When you've got problems with placing "ds_select_dst()" in your
config, you should do the following:
- Open an Editor of your choice
- go to the line, where you want to place it
- type: ds_select_dst("1", "0");
- save & exit
Just kidding! You should do the following with your config:
kamailio -f <path-to-your-config> -c
What error is displayed? If none, then check your syslog for errors.
Could you post your config? It is better to put a full path in the
config to the dispatcher-file... otherwise it might be dependent of,
where you are running the init.d-skript/kamailio....
I am using dispatcher in Kamailio 1.5, 3.1 and 3.2, everythings works
fine with me.
Kind regards,
Carsten
2011/9/28 Henrik Aagaard Sørensen <henrikaagaardsorensen(a)gmail.com>om>:
> I've installed 2 Freeswitch on different servers and would like to
> have
> Kamailio load balance between them.
>
> I've installed Kamailio following:
>
>
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
>
> I've created dispatcher.list and added:
>
> loadmodule "dispatcher.so"
>
> modparam("dispatcher", "list_file",
"../etc/dispatcher.list")
>
> in the kamailio.cfg.
>
> But looking at:
>
http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
> I'm having difficulties to placing:
>
> ds_select_dst("1", "0");
>
> in the kamailio.cfg that was created originally.
>
> Can anyone help me?
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> list
> sr-users(a)lists.sip-router.org
>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH i. Gr.
Schomburgstr. 80
D-22767 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla --
http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin:
http://asipto.com/u/kat
http://linkedin.com/in/miconda --
http://twitter.com/miconda