22 May
2019
22 May
'19
12:42 a.m.
Hi Richard,
Thanks for your reply, understood.
The issue is following (not really an issue, more an optimization):
At the moment of the offer, I simply don't know, what will be supported by
the callee. G711 is however always supported, that's why I don't want to
strip it. I send the call to our upstream provider; if he sends it to
Telefonica, we get an answer with G722 and G711. If he sends it to Deutsche
Telekom, the answer is only G711. However, we don't know, if it's gonna be
Telefonica or Deutsche Telekom...
I was thinking about avoiding uneccessary RTP traffic (in HD) between
RTPEngine and the device in case of an outbound call. From a signalling
perspective, I get the right result, if I use sdp_remove_codecs() in my
reply. However, that won't work, since the RTP stream sent from RTPEngine
to the device is in HD, regardless of the signalling.
I can live with the status quo.
Thanks again,
Carsten
Richard Fuchs <rfuchs(a)sipwise.com> schrieb am Di., 21. Mai 2019, 23:38:
On 21/05/2019 11.48, Carsten Bock wrote:
Hi,
I want to implement selective transcoding, e.g. avoiding Transcoding
between a HD codec (G722) and a non HD Codec (G711).
In case the caller does offer HD codecs, this is fine, e.g.
if(sdp_with_codecs_by_name("G722,OPUS")) {
rtpengine_offer("codec-transcode=OPUS codec-transcode=G722
codec-transcode=PCMA");
} else {
rtpengine_manage("codec-transcode=PCMA");
}
Now I have the issue, if the callee only sends me G711, I don't want
to offer G722 or Opus to the caller. However, rtpengine_answer() does
not seem to accept "codec-strip=G722 codec-strip=OPUS", e.g.:
onreply_route() {
if(!sdp_with_codecs_by_name("G722,OPUS")) {
rtpengine_ manage("codec-strip=OPUS codec-strip=G722");
}
}
As a result, the SDP always contains the transcoding options, e.g.
G722 and OPUS. I always end up in transcoding G722 to G711, which is
meaningless in that case.
Any ideas on how to solve that?
(above examples very simplified)
All transcoding options must be present in the `offer` - they're ignored
in the `answer`. (At least in newer versions - older versions did accept
them in an `answer`, but they didn't do what was expected, which is why
they were removed in later versions.)
The reason for this is that the callee may send media before the SDP
from the callee (the answer) is seen. Therefore all transcoding
decisions must be made at the time of the offer (otherwise you may end
up switching codecs whenever the answer is seen, which is undesirable).
So you'll have to figure out a way to decide what you want to do based
on what you know at the time of the offer.
I'm a bit confused by your example. If you want to avoid transcoding
between G.722 or Opus, and G.711, why do you want to offer PCMA when the
caller supports G.722 or Opus? Shouldn't you rather only offer other
"HD" codecs and strip all non-HD codecs in that case?
Cheers
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users