28 Apr
2006
28 Apr
'06
9:51 a.m.
I have this configuration:
| - > LAN
adsl -> router |
| -> linux pc with openser
the router translate the private IP 192.168.xxx with the public IP 82.xxx
any softphone in the LAN register with openser but only if I enter as server the IP
192.168.xxx. if I enter the public IP, express talk (softphone) refuse the registration
with error 500.
from outside (I tried with a different internet provider) i cannot register anyway.
in the openser.cfg I didn-t configure anything related proxies or nat, should I do
something?
attached is my openser.cfg
thanks
alex
---------- Initial Header -----------
From : "Klaus Darilion"
klaus.mailinglists(a)pernau.at
To : "buxalex(a)libero.it"
buxalex(a)libero.it
Cc : "users" users(a)openser.org
Date : Fri, 28 Apr 2006 13:50:58 +0200
Subject : Re: [Users] openser and proxy
buxalex(a)libero.it wrote:
Hello,
I have an ADSL internet connection which goes to a router.
Is there a dedicated router in front of the Linux PC or is the Linux PC
also the router?
btw: maybe this helps you: http://www.milkfish.org/
regards
klaus
From the router I have a linux machine with
openser installed,
and a econd connection goes to a LAN.
Openser IP address = 192.168.100.106 and I have a public IP (82.104.xxx.xxx)dedicated to
this address. There is no restriction to any port.
I thought it was enough to be seen from outside, but unfortunately, when I try to
register any softphone, the registration fails.
There is no way to let it work? Should I put
openser on internet before the router?
Thanks
Alessandro
I have a openser installation which has an IP address = 192.168.100.106.
To be reachable from softphones
outside the proxy
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users