3 Sep
2009
3 Sep
'09
11:15 a.m.
On 03.09.2009 12:00 Uhr, Rajesh wrote:
Yes i did cretae.. i completed authentication and presence module
successfully.. iam caught up with this.. am posting my cfg file below.
kindly correct me if iam wrong.
**************************************************************************************************************************************************
####### Global Parameters #########
debug=3
log_stderror=yes
log_facility=LOG_LOCAL0
##fork changed to NO manually from yes
fork=yes
#fork=yes
children=4
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no
/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local//etc/kamailio/tls/user/user-cert.pem"
#tls_private_key = "/usr/local//etc/kamailio/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local//etc/kamailio/tls/user/user-calist.pem"
port = 5067
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all
available) */
#listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path
mpath="/usr/local//lib/kamailio/modules/"
/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "textops.so"
loadmodule "usrloc.so"
loadmodule "maxfwd.so"
loadmodule "imc.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "registrar.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "alias_db.so"
loadmodule "domain.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
#n#loadmodule "nathelper.so"
##insert function tested here
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("domain", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("acc","db_extra","src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
# ----- usrloc params -----
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://openser:openserrw@localhost/openser")
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db",
"db_url","mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "load_credentials", "")
###registrar params added for imc
# -- registrar params --
modparam("registrar", "default_expires", 120)
# -- registrar params --
modparam("usrloc", "db_mode", 0)
# -- imc params --
modparam("imc", "imc_cmd_start_char", "#")
modparam("imc|usrloc", "db_url",
"mysql://openser:openserrw@192.168.64.75/openser")
##the following three lines were added seperately for imc
modparam("imc", "rooms_table","imc_rooms")
modparam("imc", "rooms_table","imc_members")
modparam("imc", "hash_size", 8)
# -- tm params --
modparam("tm", "fr_timer", 10 )
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "wt_timer", 10 )
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
modparam("alias_db",
"db_url","mysql://openser:openserrw@localhost/openser")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
modparam("domain", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address",
"sip:192.168.64.75:5060")
# -- nathelper
#n#modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:7722")
#n#modparam("nathelper", "natping_interval", 30)
#n#modparam("nathelper", "ping_nated_only", 1)
#n#modparam("nathelper", "sipping_bflag", 7)
#n#modparam("nathelper", "sipping_from",
"sip:pinger@kamailio.org")
#n#modparam("registrar|nathelper", "received_avp",
"$avp(i:80)")
#n#modparam("usrloc", "nat_bflag", 6)
####### Routing Logic ########
# main request routing logic
route{
insert_hf("To-username: test");
if (!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many Hops");
exit;
}
########The following set of lines were added for implementing imc
# registrations -
##the following line has been added for creating chat rooms
##insert_hf (#create chat-000)
if(is_method("REGISTER")) {
save("location");
exit;
}
##if(uri=~"sip:q*@")
## if(uri=~"sip:chat0000@192.168.64.75")
##the below line has been edited by Rajesh.
if(uri=~"sip:chat0000@192.168.64.75")
{
# IMC - message
#imc xdbg("script: message from [$fu ] r-uri [$ru ] msg
[$rb]\n");
##the above two lines are edited for imc by Rajesh.
xdbg("script: message from [$fu ] chatroom000 [$ru ] msg
[$rb]\n");
if(is_method("MESSAGE"))
{
log("MESSAGE received -> processing with imc\n");
sl_send_reply("200", "ok");
imc_manager(); exit;
} else {
sl_send_reply("404", "not found");
exit;
};
} else {
xdbg("script: message not for room, from [$fu ] r-uri [$ru] msg
[$rb]\n");
if(!lookup("location"))
{
sl_send_reply("404", "not found");
exit;
}
t_relay();
#sl_send_reply("200", "ok");
exit();
};
#######The above lines were added for implementing imc
#insert function tested below
insert_hf("Test1");
# NAT detection
route(4);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(1);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(2);
exit;
}
if ( is_method("ACK") ) {
## insert functioin tested below
insert_hf("Test_in_ACK");
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK
after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and
discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authentication
route(3);
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
#insert_hf("To-username: test");
setflag(1); # do accounting
}
if (!uri==myself)
/* replace with following line if multi-domain support is used */
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
# requests for my domain
insert_hf ("Test2");
if( is_method("PUBLISH|SUBSCRIBE"))
route(2);
if (is_method("REGISTER"))
{
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
if (!lookup("location")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
##insert function added below
##insert_hf ("Test4");
route[1] {
##insert function added below
insert_hf ("Test5");
#n# if (check_route_param("nat=yes")) {
#n# setbflag(6);
#n# }
#n# if (isflagset(5) || isbflagset(6)) {
#n# route(5);
#n# }
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
insert_hf ("Test5");
##tried insert function here.
#t_on_branch("1");
##tried here
insert_hf("To-username: test");
t_on_reply("1");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence server */
route[2]
{
##tried here for insert function.
#insert_hf("Test_Presence");
#p# if (!t_newtran())
#p# {
#p# sl_reply_error();
#p# exit;
#p# };
#p#
#p# if(is_method("PUBLISH"))
#p# {
#p# handle_publish();
#p# t_release();
#p# }
#p# else
#p# if( is_method("SUBSCRIBE"))
#p# {
#p# handle_subscribe();
#p# t_release();
#p# }
#p# exit;
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
/* uncomment the whole following route for enabling authentication */
route[3] {
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("192.168.64.75", "subscriber"))
{
www_challenge("192.168.64.75", "0");
exit;
}
###the following lines are uncommented
if ($au!=$tU)
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
else
{
# authenticate if from local subscriber (uncomment to enable auth)
if (from_uri==myself)
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (is_method("PUBLISH"))
{
if ($au!=$tU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
if ($au!=$fU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
consume_credentials();
# caller authenticated
}
}
return;
}
# Caller NAT detection route
/* uncomment the whole following route for enabling Caller NAT Detection */
route[4]{
#n# force_rport();
#n# if (nat_uac_test("19")) {
#n# if (method=="REGISTER") {
#n# fix_nated_register();
#n# } else {
#n# fix_nated_contact();
#n# }
#n# setflag(5);
#n# }
return;
}
# RTPProxy control
/* uncomment the whole following route for enabling RTPProxy Control */
route[5] {
#n# if (is_method("BYE")) {
#n# unforce_rtp_proxy();
#n# } else if (is_method("INVITE")){
#n# force_rtp_proxy();
#n# }
#n# if (!has_totag()) add_rr_param(";nat=yes");
return;
}
branch_route[1] {
xdbg("new branch at $ru\n");
}
onreply_route[1] {
xdbg("incoming reply\n");
#n# if ((isflagset(5) || isbflagset(6)) &&
status=~"(183)|(2[0-9][0-9])") {
#n# force_rtp_proxy();
#n# }
#n# if (isbflagset(6)) {
#n# fix_nated_contact();
#n# }
}
failure_route[1] {
#n# if (is_method("INVITE)
#n# && (isbflagset(6) || isflagset(5))) {
#n# unforce_rtp_proxy();
#n# }
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
**************************************************************************************************************************************************
Daniel-Constantin Mierla wrote:
Hello,
have you created the db tables: kamdbctl create?
Cheers,
Daniel
On 03.09.2009 11:44 Uhr, Rajesh wrote:
Dear Team,
Iam configuring imc for kamailio-1.5 and while iam
trying to load the module, i get the following error .Kindly guide me
with a solution
ERROR:db_mysql:db_mysql_submit_query: driver error on query: Unknown
column 'name' in 'field list'
Sep 3 12:24:20 [18583] ERROR:core:db_do_query: error while submitting
query
Sep 3 12:24:20 [18583] ERROR:imc:add_from_db: failed to querry table
Sep 3 12:24:20 [18583] ERROR:imc:mod_init: failed to get information
from db
Sep 3 12:24:20 [18583] ERROR:core:init_mod: failed to initialize module
imc
Sep 3 12:24:20 [18583] ERROR:core:main: error while initializing modules
--