3 Nov
2014
3 Nov
'14
11:33 a.m.
thank you Richard,that was it, at least 1 side is working, the other side I think is
having issues with the Record-Route having the private IP in it.I know it is out of
context , but do you know how to make Kamailio to use the Public IP instead?txs a lot!jp
On Monday, November 3, 2014 9:17 AM, Juan Perez <juan_perez_2014(a)yahoo.com>
wrote:
thank you Richard, yes the IP is local to the machine:
./rtpengine --interface=pub/<PUBLIC_IP> --interface=priv/10.0.2.68
--listen-ng=127.0.0.1:7722--timeout=30 --port-min=35000 --port-max=65000 --log-level=7
--log-facility=daemon
The PUBLIC_IP is a NAT that the machine has, it is a virtual machine (Amazon), so it is
not configured on any interface in that machine.
But the Private one it is configured on the eth0:
[root@ip-10-0-2-68]# ifconfig
eth0 Link encap:Ethernet HWaddr 12:23:49:EF:3A:53
inet addr:10.0.2.68 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::1023:49ff:feef:3a53/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:9001 Metric:1
RX packets:161973 errors:0 dropped:0 overruns:0 frame:0
TX packets:102009 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:117022408 (111.6 MiB) TX bytes:20614133 (19.6 MiB)
Interrupt:247
This is how kamailio is setup to communicate with rtpengine and it is the only line I have
manually configured for that module in the kamailio config file, everything else is by
default
:
# ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:7722")
This is the line I have on the Route section to forward the INVITE to the Asterisk:
rtpengine_offer("direction=pub direction=pub replace-origin
replace-session-connection");
The whole Route section is this:
route[TO_FS] {
# here we load the Asterisk GWs that will be used to send the calls out.
t_on_reply("TO_FS");
t_on_failure("TO_FS");
$var(result) = load_gws(10);
rtpengine_offer("direction=pub direction=pub replace-origin
replace-session-connection");
xlog("L_INFO","mylog: TO_FS: Call received. Loading LCR_GRP
10\n");
if (!load_gws(10)) {
xlog("L_INFO","mylog: TO_FS: After, GW_URI_AVP:
$avp(i:709).\n");
sl_send_reply("503", "Unable to load destination
gateways");
xlog("L_INFO","mylog: TO_FS: Destination GWs load section
failed!. Load_GW function.\n");
exit;
}
if(!next_gw()){
xlog("L_INFO","mylog: TO_FS: After, GW_URI_AVP:
$avp(i:709).\n");
xlog("L_INFO","mylog: TO_FS: Destination GWs load section
failed!. Next_GW function.\n");
sl_send_reply("503", "Unable to find a gateway");
exit;
}
xlog("L_INFO","mylog: TO_FS: Destination GWs load section
OK.\n");
if (!t_relay()) {
xlog("L_INFO","mylog: TO_FS. T_Relay failed. Method
[$rm].\n");
sl_reply_error();
}
exit;
}
And this is the line I setup when I manage the Reply from the Asterisk:
onreply_route[TO_FS] {
xlog("L_INFO","mylog: OnReply Route TO_FS.\n");
if (has_body("application/sdp")) {
xlog("L_INFO","mylog: Starting rtpengine session.
Answer\n");
rtpengine_answer("direction=pub direction=pub replace-origin
replace-session-connection");
}
exit;
}
On Monday, November 3, 2014 8:59 AM, Richard Fuchs <rfuchs(a)sipwise.com> wrote:
On 11/01/14 15:39, Juan Perez wrote:
Hi, I have kamilio-4.2 and rtpengine running on the
same machine.
I have this scenario:
softphone --> Kamailio with Rtpengine --> Asterisk
The softphone initiates the call, it is sent to the Asterisk. I can see
the SDPs being re-written with the new IP/Ports provided by rtpengine:
Invite from Kamailio to Asterisk
200 Ok from Kamailio to Softphone
However, I take a signaling/media capture on the server where the
kamailio/rtpengine are running and see the RTP coming from both
endpoints (softphone and asterisk) to the correct ports but there is no
packets coming out from the proxy to either direction.
I see these 2 lines on the rtpengine log and make me think that
something prevents the rtpengine to stream out to the 2 endpoints:
Nov 1 18:59:26 ip-10-0-2-68 rtpengine[27764]:
[0866b358-dc9c-1232-1399-3767db69b8dd port 35038] Write error on RTP socket
Seeing as you're using the "direction" options, can you double check
that the local IP addresses that you've configured at the command line
are actually addresses bound to local interfaces on the machine?
cheers
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users