[Serusers] Mediaproxy works only for the caller

Hey all, I am using ser-0.9.4 and mediaproxy-1.4.2 but it seems that mediaproxy only works for the caller. During a call, if I use sessions.py, i see: Caller Via Called Status Duration Codec Type Traffic ---------------------------------------------------------------------------------------------- 150.164.x.x:8000 - 127.0.0.1:35000 - ?.?.?.?:? inactive 0'26" Unknown Audio 0/0/0 Total traffic: 0bps/0bps/0bps (in1/in2/out) Session count: 1 Proxy version: 1.4.2 The status is inactive and after 60 seconds it ends. The called part receives audio but the caller receives nothing. It seems that the called part is not passing through media proxy. Here it is my ser.cfg: route{ if (!mf_process_maxfwd_header("10")) { if (method!="ACK") { sl_send_reply("483", "Too many hops"); }; break; }; if (msg:len >= max_len) { if (method!="ACK") { sl_send_reply("513", "Message too big"); }; break; }; record_route(); if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; t_relay(); break; }; if (method=="REGISTER") { # Mark as NAT'ed if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; if (!www_authorize("mydomain", "subscriber")) { www_challenge("mydomain", "0"); break; } if (!save("location")) { sl_reply_error(); }; break; }; if (method == "BYE" || method == "CANCEL") { end_media_session(); }; # Force subsequent messages to pass trough this proxy if (method == "INVITE") { record_route(); }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; if (!lookup("location")) { sl_send_reply("404", "User not found"); break; }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } How do I do for the called part to pass through mediaproxy? I've searched about this, but I found nothing. Initially I was using ser0.8.14 and I thought it was a problem with it and I am now using 0.9.0. It seems that the problem wasnt with ser version 0.8.14. Could anyone give me some advice or tell me where I can find more information about it? Thanx, Felipe -- Master Student - Electrical Engineering Department Computer Engineering and Telecommunications Research Group Universidade Federal de Minas Gerais - Brazil "For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life." John 3:16