Re: [SR-Users] Kamailio 4.1 and Cisco 79xx Integration Work

Hi Alex, Thanks for the fast response as usual! :) Will give it a try. Thanks Jon From: abalashov(a)evaristesys.com Date: Fri, 4 Apr 2014 17:10:10 +0200 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio 4.1 and Cisco 79xx Integration Work You can modify the destination set ($du), which will influence where t_relay() and forward() sends things. On 4 April 2014 17:08:46 CEST, Jonathan Hunter <hunterj91(a)hotmail.com> wrote: Hi Guys, I'm doing some work, with Legacy Cisco phones, its a long story but I need to manipulate signaling due to firmware limitations. I am looking to implement a workaround, whereby I need to modify an ACK, so that it sends the RURI is sent to port 5060, and the destination Port at the IP layer is unchanged, I can do this with static values as below; sethostport("1.2.3.4:5060"); t_relay("1.2.3.4","38596"); In terms of doing this for multiple sites I need to use pseudo variables, so I wondered how this could be achieved, as t_relay or forward dont support dynamic values to this point, or do they? Any comments would be great. Many thanks Jon SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Sent from my mobile, and thus lacking in the refinement one might expect from a fully fledged keyboard. Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 United States Tel: +1-678-954-0671 Web: http://www.evaristesys.com/, http://www.alexbalashov.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users