Hi Alex,

Thanks for the fast response as usual! :)

Will give it a try.

Thanks

Jon

From: abalashov@evaristesys.com
Date: Fri, 4 Apr 2014 17:10:10 +0200
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Kamailio 4.1 and Cisco 79xx Integration Work

You can modify the destination set ($du), which will influence where t_relay() and forward() sends things.

On 4 April 2014 17:08:46 CEST, Jonathan Hunter <hunterj91@hotmail.com> wrote:

Hi Guys,

I'm doing some work, with Legacy Cisco phones, its a long story but I need to manipulate signaling due to firmware limitations.

I am looking to implement a workaround, whereby I need to modify an ACK, so that it sends the RURI is sent to port 5060, and the destination Port at the IP layer is unchanged, I can do this with static values as below;

sethostport("1.2.3.4:5060");
t_relay("1.2.3.4","38596");

In terms of doing this for multiple sites I need to use pseudo variables, so I wondered how this could be achieved, as t_relay or forward dont support dynamic values to this point, or do they?

Any comments would be great.

Many thanks

Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

--
Sent from my mobile, and thus lacking in the refinement one might expect from a fully fledged keyboard.

Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0671
Web: http://www.evaristesys.com/, http://www.alexbalashov.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users