25 Sep
2012
25 Sep
'12
2:29 p.m.
if(is_method("INVITE")){
ds_select_dst("1","4");
$sht(forw=>$ft)=$du;
sl_send_reply("100","Trying");
route(RELAY);
exit();
}
This way I am using table address, and all servers with group=1, using method 4
$sht(forw=>$ft)=$du; - this store selected address in variable.
May be my way is not good - I had troubles with ACK, BYE and I
continue to have some troubles with messages - unfortunatelly I have
even no enough time to get exact what happens with messages.
But for calls - this work good enough.
Just check ds_select_dst
On Tue, Sep 25, 2012 at 2:22 PM, Ian French <fretec(a)gmail.com> wrote:
Hi,
I've been working my way throught this tutorial (
http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb)
and all it working well thanks. In the other benifits section you mention
that this configuration can be used with multiple instances of Asterisk.
Could you elaborate a little on this?? Is this achieved using the Dispatcher
module? I'm trying to get this working with two instances of Asterisk but I
can figure out how to specifc multiple asterisk servers as oppossed to the
single.
asterisk.bindip = "192.168.178.23" desc "Asterisk IP Address"
asterisk.bindport = "5080" desc "Asterisk Port"
Thanks in advance
Ian
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users