19 Dec
2005
19 Dec
'05
10:50 a.m.
Hi Klaus,
first, the pike module will count the IP source only for the requests
called with pike_check_req(). There is no multiple counters support -
only one.
so, from script you can filter what requests you want to count. That's
all you need to do in order to use it.
regarding the configuration, you have three parameters: sampling time
unit (S), request density per unit (N) and removed latency (L). In
words: the alarm will be trigger if you get more than N request per S
seconds. The alarm will be removed if no other request is received in L
seconds.
So, in your case, try:
modparam("pike", "sampling_time_unit", 4)
modparam("pike", "reqs_density_per_unit", 2)
and
if (is_method("REGISTER") && !pike_check_req()) {
log("...");
exit;
}
regards,
bogdan
Klaus Darilion wrote:
Hi!
I have a SIP phone sending a REGISTER request every second. I want to
block requests from this SIP phone for some time. I've read the docs
but IMO the configuration and usage is quite complicated. Can the pike
module be used to block this user? I'm not sure how to configure the
pike module to block the REGISTER (1 request per second) but to allow
proper dialing (e.g. a call setup may have 4 requests within one second).
Does the pike module count all requests received or only those
requests for which I execute pike_check_req()?
regards
klaus
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users