[Serusers] Re: Help me Please- rtpproxy error

>Linux Configuration: >RedHat 9.0 / Athlon 1900+ / 256MB >CVS SER_0_8_12 e RTPPROXY > >ser.cfg ># ># $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $ ># ># simple quick-start config script including nathelper support > ># This default script includes nathelper support. To make it work ># you will also have to install Maxim's RTP proxy. The proxy is enforced ># if one of the parties is behind a NAT. ># ># If you have an endpoing in the public internet which is known to ># support symmetric RTP (Cisco PSTN gateway or voicemail, for example), ># then you don't have to force RTP proxy. If you don't want to enforce ># RTP proxy for some destinations than simply use t_relay() instead of ># route(1) ># ># Sections marked with !! Nathelper contain modifications for nathelper ># ># NOTE !! This config is EXPERIMENTAL ! ># ># ----------- global configuration parameters ------------------------ > >debug=3 # debug level (cmd line: -dddddddddd) >fork=yes >log_stderror=no # (cmd line: -E) > >/* Uncomment these lines to enter debugging mode >fork=no >log_stderror=yes >*/ > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >port=5060 >children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >#loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" >loadmodule "/usr/local/lib/ser/modules/textops.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >#loadmodule "/usr/local/lib/ser/modules/auth.so" >#loadmodule "/usr/local/lib/ser/modules/auth_db.so" > ># !! Nathelper >loadmodule "/usr/local/lib/ser/modules/nathelper.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >#modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module ># >#modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this

># uncomment also the following parameter) ># >#modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy >modparam("rr", "enable_full_lr", 1) > ># !! Nathelper >modparam("registrar", "nat_flag", 6) >modparam("nathelper", "natping_interval", 30) # Ping interval 30 s >modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind

># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # !! Nathelper > # Special handling for NATed clients; first, NAT test is > # executed: it looks for via!=received and RFC1918 addresses > # in Contact (may fail if line-folding is used); also, > # the received test should, if completed, should check all > # vias for rpesence of received > if (nat_uac_test("3")) { > # Allow RR-ed requests, as these may indicate that > # a NAT-enabled proxy takes care of it; unless it is > # a REGISTER > > if (method == "REGISTER" || ! search("^Record-Route:")) { > log("LOG: Someone trying to register from private IP, >rewriting\n"); > > # This will work only for user agents that support >symmetric > # communication. We tested quite many of them and >majority is > # smart enough to be symmetric. In some phones it

>a configuration > # option. With Cisco 7960, it is called

>with kphone it is > # called "symmetric media" and "symmetric

> fix_nated_contact(); # Rewrite contact with source IP

>signalling > if (method == "INVITE") { > fix_nated_sdp("1"); # Add direction=active to SDP > }; > force_rport(); # Add rport parameter to topmost Via > setflag(6); # Mark as NATed > }; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication ># if (!www_authorize("iptel.org", "subscriber")) { ># www_challenge("iptel.org", "0"); ># break; ># }; > > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > append_hf("P-hint: usrloc applied\r\n"); > route(1); >} > >route[1] >{ > # !! Nathelper > if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && >!search("^Route:")){ > sl_send_reply("479", "We don't forward to private IP >addresses"); > break; > }; > > # if client or server know to be behind a NAT, enable relay > if (isflagset(6)) { > force_rtp_proxy(); > }; > > # NAT processing of replies; apply to all transactions (for