30 Jun
2009
30 Jun
'09
11:38 a.m.
Hello,
can you get the packet sent via mi_datagram? if you use udp inet socket
in mi_datagram you should be able to get it with network sniffer/ngrep.
Hope sems support net datagram socket as well.
Thanks,
Daniel
On 06/30/2009 01:35 AM, Aymeric Moizard wrote:
On Mon, 29 Jun 2009, Daniel-Constantin Mierla wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com/
Hello,
On 06/28/2009 05:35 PM, Aymeric Moizard wrote:
>
>
> On Sun, 28 Jun 2009, Aymeric Moizard wrote:
>
>>
>> Hi,
>>
>> I have an old openser13x which is used only to
>> control my sems voicemail and voice service.
>
> I just checked with kamailio15x and the same error happens in
> mi_datagram.
can you capture the packet sent over the datagram
and paste it here?
Since I do not have a sems instance now, I am not able to test it
without a sample.
Here is the capture:
http://sip.antisip.com/call-sdp-with-quote.pcap
The line where the problem shows is this one:
a=fmtp:98 mode="6,any";cng=on
The above comes directly from the newest rfc ;)
http://www.ietf.org/rfc/rfc5574.txt
Those " can appear in any a att-value where: (rfc4566)
att-value = byte-string
byte-string = 1*(%x01-09/%x0B-0C/%x0E-FF)
;any byte except NUL, CR, or LF
I'm now using sipctrl plugin with sems to avoid the issue! So
I'm not in a hurry for the fix...
Tks
Aymeric
Thanks,
Daniel
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
tks
Aymeric
--
Daniel-Constantin Mierla
http://www.asipto.com/
Some may know that speex payload format was
published
as an rfc last week and the last change before publication
was the addition of the "quote" for the mode parameter.
a=fmtp:98 mode="6,any"
It's pretty clear that the '"' character is messing up the mi_datagram
exchange.
Jun 28 15:12:14 ns26829 Sems[30885]: Debug:
(AmUtils.cpp)(write_to_socket)(588): sending: <:t_reply: 200 OK
56471:1271880648 784D98C0-4A476C2E000F397\
7-B6C56BB0 "Contact: <sip:welcome@91.121.81.212:5070>^M
Content-Type: application/sdp^M " "v=0^M o=- 0 0 IN IP4
91.121.81.212^M s=session^M c=IN IP4 \
91.121.81.212^M t=0 0^M m=audio 11066 RTP/AVP 98 0 8 101^M
a=rtpmap:98 speex/8000^M a=fmtp:98 mode="6,any";cng=on^M a=rtpmap:0
PCMU/8000^M a=rtpmap:8\
PCMA/8000^M a=rtpmap:101 telephone-event/8000^M a=fmtp:101 0-15^M " >
Jun 28 15:12:14 ns26829 Sems[30885]: Debug:
(AmUtils.cpp)(write_to_socket)(614): write to unix socket: completed
Jun 28 15:12:15 ns26829 /home/jack/install13x/sbin/openser[3328]:
ERROR:mi_datagram:mi_datagram_parse_node: didn't find newline case1
Jun 28 15:12:15 ns26829 /home/jack/install13x/sbin/openser[3328]:
ERROR:mi_datagram:mi_datagram_parse_node: parse error around 6
Jun 28 15:12:15 ns26829 /home/jack/install13x/sbin/openser[3328]:
ERROR:mi_datagram:mi_datagram_parse_tree: parse error!
Jun 28 15:12:15 ns26829 /home/jack/install13x/sbin/openser[3328]:
ERROR:mi_datagram:mi_datagram_server: failed to parse the MI tree
Jun 28 15:12:15 ns26829 Sems[30885]: Debug:
(UnixSocketAdapter.cpp)(cacheMsg)(90): recv-ed: <<400 parse error
in command>>
Jun 28 15:12:15 ns26829 Sems[30885]: Error:
(UnixSocketAdapter.cpp)(send_msg)(531): SER answered: 400 parse
error in command
Jun 28 15:12:15 ns26829 Sems[30885]: Error:
(AmSession.cpp)(onInvite)(695): 500 could not send response
Question is: what's the best option for me to workaround
this!
Aymeric MOIZARD / ANTISIP
amsip - http://www.antisip.com
osip2 - http://www.osip.org
eXosip2 - http://savannah.nongnu.org/projects/exosip/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users