21 Oct
2015
21 Oct
'15
11:42 a.m.
Hello Daniel,
thanks for the reply. I try out your suggestion, but this is not working. There is no
sound transmitted and the connection ended after 23 seconds (I think a timer is expired).
Scenario is:
Kamailio route all internal calls only internal (external vice versa)
Kamailio route all internal to external through rtpproxy (also vice versa)
INT_IP: 203.207.111.58
EXT_IP: 193.16.163.58
Here my code:
request_route {
if(is_method("REGISTER")) {
if(dst_ip==203.207.111.58){
setbflag(20);
}else{
setbflag(21);
}
}
}
Route [NATMANAGE]
if(dst_ip==203.207.111.58 && isflagset(20)){
rtpproxy_manage("coii");
}else if(dst_ip==203.207.111.58 && isflagset(21)){
rtpproxy_manage("coie");
}else if(dst_ip==193.16.163.58 && isflagset(20)){
rtpproxy_manage("coei");
}else if(dst_ip==193.16.163.58 && isflagset(21)){
rtpproxy_manage("coee");
}
Alternative try
if(from_uri=~".*(a)203.207.111.58" && isflagset(20)){
rtpproxy_manage("coii");
}else if(from_uri=~".*(a)203.207.111.58" && isflagset(21)){
rtpproxy_manage("coie");
}else if(from_uri=~".*(a)193.16.163.58" && isflagset(20)){
rtpproxy_manage("coei");
}else if(from_uri=~".*(a)193.16.163.58" && isflagset(21)){
rtpproxy_manage("coee");
}
Another try
if(from_uri=~".*(a)203.207.111.58" && isflagset(20)){
rtpproxy_manage("coii");
}else if(from_uri=~".*(a)203.207.111.58" && isflagset(21)){
rtpproxy_manage("coie");
}else if(from_uri=~".*(a)193.16.163.58" && isflagset(20)){
rtpproxy_manage("coei");
}else if(from_uri=~".*(a)193.16.163.58" && isflagset(21)){
rtpproxy_manage("coee");
}
RTPproxy config
EXTRA_OPTS="-l 203.207.111.58/193.16.163.58 -m 20000 -M 20100 -d
WARN:LOG_LOCAL1"
Some debugging information are in the txt file. TCPdump debugging does not shows
interesting informations...
Has somebody a good idea which could be helpful? Do you need some more information?
Cheers,
Kai
Von: sr-users [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von
Daniel-Constantin Mierla
Gesendet: Montag, 12. Oktober 2015 14:26
An: Kamailio (SER) - Users Mailing List <sr-users(a)lists.sip-router.org>
Betreff: Re: [SR-Users] Routing between 2 domains
Hello,
the src_ip is not a local IP, so do not match it with INT_IP or EXT_IP. The dst_ip is
local ip, but the one on which the interface was received.
You can test the $fs to see what socket is going to be used for sending out.
Or set some branch flag for each interface when the registration is processed and check
that in branch route
if(is_method("REGISTER")) {
if(dst_ip==INT_IP){
setbflag(20);
}else{
setbflag(21);
}
}
then in route[NATMANGE] have conditions like:
if(src_ip==INT_IP && isflagset(20)) {
# internal to internal
} else if(src_ip==INT_IP && isflagset(21)) {
# internal to external
} else if ...
Cheers,
Daniel
On 08/10/15 11:14, kai.ohnacker@cbc.de<mailto:kai.ohnacker@cbc.de> wrote:
Hello community,
I work with Kamailio 4.2.0 which is placed between two networks (with two interfaces) and
RTPproxy in bridge mode.
The task from Kamailio is to handle the calls from internal networks to internal networks
only on the internal Interface without bridging. For external networks vice versa. If the
call comes from external to internal, then the RTPproxy should work in bridge mode and
vice versa. I adapt the example with IPv4 and IPv6 routing, but this is not working for
internal to external calls and vice versa
(http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6). Only external calls and only
internal calls works. I think the cause of this behavior is the routing which I
implemented to the RTPmanage part in the Kamailio config.
The error message is given by the internal device. (call from external to internal)
If I make a call from internal to external, the RTP stream is only in one direction.
Internal Interface IP: 203.207.111.58
External Interface IP: 193.16.163.58
The RTPproxy config is:
CONTROL_SOCK=udp:127.0.0.1:9000
EXTRA_OPTS="-l 203.207.111.58/193.16.163.58 -d WARN:LOG_LOCAL1"
Kamailio.cfg:
#!define INT_IP 10.96.0.0/14
#!define EXT_IP 193.0.0.0/8
# RTPProxy control and singaling updates for NAT traversal
route[NATMANAGE] {
#!ifdef WITH_NAT
if (is_request()) {
if(has_totag()) {
if(check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
}
}
if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))
return;
# rtpproxy_manage("co");
# Start Test routing
if((src_ip==INT_IP && dst_ip==EXT_IP)){
rtpproxy_manage("cowie");
}
if((src_ip==EXT_IP && dst_ip==INT_IP)){
rtpproxy_manage("cowei");
}
if (is_request()) {
if (!has_totag()) {
if(t_is_branch_route()) {
add_rr_param(";nat=yes");
}
}
}
if (is_reply()) {
if(isbflagset(FLB_NATB)) {
if(is_first_hop())
set_contact_alias();
}
}
#!endif
return;
}
Can someone help me with the right routing? Do you need some more debugging information?
Cheers,
Kai
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com