[Serusers] Radius accounting - User-Name parameter in the Start Acct-Status-Type

Hi! Is it possible to configure acc_radius in such a way that it will send a User-Name parameter in the Accounting Packet because now it doesn't: rad_recv: Accounting-Request packet from host 127.0.0.1 port 32844, id=246, length=474 SER-Attr = "" Acct-Session-Id = &quot;6012E956-D8D3-2367-979B-753579FE59FF(a)192.168.1.2&quot; Sip-To-Tag = "572241288" SER-From = "tomix <sip:tomix@tezet.no-ip.org:7060>;tag=2020612254" SER-Flags = 8 SER-Original-Request-ID = "sip:hellboy@tezet.no-ip.org" Sip-Method = "INVITE" Sip-Cseq = 20886 Sip-Translated-Request-ID = "sip:hellboy@192.168.1.10:5060" Sip-Source-IP-Address = 192.168.1.2 Sip-From-Tag = "2020612254" SER-To = "<sip:hellboy@tezet.no-ip.org>;tag=572241288" SER-Digest-Username = "tomix" SER-Request-Timestamp = 1171023334 Calling-Station-Id = "sip:tomix@tezet.no-ip.org:7060" Sip-Source-Port = 7060 SER-Digest-Realm = "tezet.no-ip.org" Sip-Response-Code = 200 Called-Station-Id = "sip:hellboy@tezet.no-ip.org" SER-Response-Timestamp = 1171023341 Acct-Status-Type = Start Service-Type = IAPP-Register NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 127.0.0.1 Cheers Tomasz