4 Jan
2010
4 Jan
'10
4:45 p.m.
Hi all,
First of all, answering to Andrei, yes the version I am using is 2.0.
And, in fact, all the problems I have with SER are related to /var/run/ser.
This morning I checked and it was not there, so I created the directory, which solved the
problem. However, after rebooting the directory was gone again; so I decided to uninstall
completely SER and start again with the process, which showed me that /var/run/ser was
created correctly during the installation. But, I do not know why, it does not survive
after rebooting...
I know that one possibility is to create it directly when calling SER, however I would
like to make it survive the reboot.
I though to make it immutable but I am not sure if it is the correct solution. Is there
any other way?
Thanks in advance,
Rebeca Martinez
-----Mensaje original-----
De: Andrei Pelinescu-Onciul [mailto:andrei@iptel.org]
Enviado el: mié 23/12/2009 21:32
Para: Martínez García, Rebeca
CC: serusers(a)lists.iptel.org; Huertas García, Victor
Asunto: Re: [Serusers] problems when starting ser
On Dec 23, 2009 at 13:06, "Mart?nez Garc?a, Rebeca" <remartinez(a)indra.es>
wrote:
Hello all,
I have installed ser in Ubuntu Karmic by means of Synaptic without any problems or errors
during the installation.
But before starting to configure the ser.cfg, I decided firstly to try the configuration
by default and I got this error (I only uncommented the "log_stderror=yes"):
cng@cng:/etc/ser$ ser D E
Listening on
udp: 127.0.0.1 [127.0.0.1]:5060
udp: 10.1.3.207 [10.1.3.207]:5060
udp: 192.168.50.10 [192.168.50.10]:5060
tcp: 127.0.0.1 [127.0.0.1]:5060
tcp: 10.1.3.207 [10.1.3.207]:5060
tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
tcp: cng.local:5060
tcp: cng:5060
tcp: localhost:5060
udp: cng.local:5060
udp: cng:5060
udp: localhost:5060
0(2956) init_tcp: using epoll_lt as the io watch method (auto detected)
cng@cng:/etc/ser$ 0(2958) Maxfwd module- initializing
0(2958) ERROR: fifo_server.c:857: Can't create FIFO: No such file or directory
(mode=384)
0(2958) ERROR: ctl: mod_init: init ctrl. sockets failed
0(2958) init_mod(): Error while initializing module ctl
ERROR: error while initializing modules
I don't know which version and what config are included with the Ubuntu
package, but it looks at least a 2.0 version.
You probably don't need the fifo at all. You only need it if you have
some scripts for an older ser version. Just comment it out of the .cfg
and use sercmd to send runtime commands to ser.
It seems that it starts ok but suddenly finds an error and stops.
There is probably a problem with the fifo path in the .cfg.
However if I run:
cng@cng:/etc/ser$ sudo /etc/init.d/ser start
Starting ser: serListening on
udp: 127.0.0.1 [127.0.0.1]:5060
udp: 10.1.3.207 [10.1.3.207]:5060
udp: 192.168.50.10 [192.168.50.10]:5060
tcp: 127.0.0.1 [127.0.0.1]:5060
tcp: 10.1.3.207 [10.1.3.207]:5060
tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
tcp: cng.local:5060
tcp: cng:5060
tcp: localhost:5060
udp: cng.local:5060
udp: cng:5060
udp: localhost:5060
0(3016) init_tcp: using epoll_lt as the io watch method (auto detected)
.
0(3018) unable to create pid file /var/run/ser/ser.pid: No such file or directory
It only complains about the ser.pid file.
I am a little bit confused. Where is the problem?
Probably you don't have /var/run/ser (maybe it was not created
by the package) or there is some kind of permission problem.
Either mkdir /var/run/ser or start ser with -P /var/run/ser.pid.
Andrei