23 Aug
2007
23 Aug
'07
12:08 p.m.
Hi,
I get following output wenn executing the command:
database engine 'MYSQL' loaded
Control engine 'FIFO' loaded
entering fifo_cmd lcr_dump
RULE:: PREFIX=0 FROM_URI= GRP_ID=1 PRIORITY=1
FIFO command was:
:lcr_dump:openser_receiver_24617
But in my database I have following values:
Prefix=00043 FROM_URI=.* GRP_ID=1 PRIORITY=1
How can I set the lcr module to caching mode. Because I think the
command
modparam("lcr","db_mode",1) is not available anymore.
Thanks for your help!
Best regards
Martin
-----Original Message-----
From: Papadopoulos Georgios [mailto:geop@altectelecoms.gr]
Sent: Thursday, August 23, 2007 8:46 AM
To: Gruber Martin (IFKL IT OS NV)
Cc: users(a)openser.org
Subject: RE: OpenSER Oracle Connection
Hi Martin,
No I did not do any changes in openserctlrc, because I do not do any db
interaction through openserctl. In 1.2 lcr is only working in caching
mode and it just loads all the data from tables lcr and gw into memory.
Run
/usr/local/openser-1.2.x/sbin/openserctl fifo lcr_dump to see what is in
memory.
best regards
George
-----Original Message-----
From: Martin.Gruber1(a)infineon.com
[mailto:Martin.Gruber1@infineon.com]
Sent: Wednesday, August 22, 2007 7:02 PM
To: Papadopoulos Georgios
Cc: users(a)openser.org
Subject: RE: OpenSER Oracle Connection
Hi,
I am sorry to disturb you again, but did you change your
"openserctlrc"
for using oracle. I need information what openser sends to my Database
(queries) or what are the rules for LCR.
Thanks for your help!
Regards
Martin
-----Original Message-----
From: Papadopoulos Georgios [mailto:geop@altectelecoms.gr]
Sent: Wednesday, August 22, 2007 4:48 PM
To: Gruber Martin (IFKL IT OS NV)
Cc: users(a)openser.org
Subject: RE: OpenSER Oracle Connection
Hi Martin,
In OpenSER 1.1, the lcr module would not work with oracle through
unixodbc when used in the non-caching mode. That was because the query
was using functions CHAR_LENGTH and RAND that are
unknown to oracle.
In OpenSER 1.2 the lcr module is only working in caching mode. So
there should be no problem.
Probably what you need is .* or the appropriate regexp in the
from_uri.
Check the lcr document for more info.
Best regards
George
-----Original Message-----
From: Martin.Gruber1(a)infineon.com
[mailto:Martin.Gruber1@infineon.com]
Sent: Wednesday, August 22, 2007 3:39 PM
To: Papadopoulos Georgios
Cc: users(a)openser.org
Subject: RE: OpenSER Oracle Connection
Hi Georgios,
I only want to ask you, if you also use the LCR-Tool.
With mysql it was running well, but now I have problems
with it. I do
not know, if it is a problem of Unixodbc (I do
not think so).
I use the following table structure:
Lcr:
PREFIX | FROM_URI | GRP_ID
|
PRIORITY |
--------------------------------------------------------------
----------
-------------------------------------------------------------
| | 1 |
1 |
Gw:
GW_NAME | GRP_ID | IP_ADDR | PORT |
URI_SCHEME | TRANSPORT | STRIP | PREFIX
--------------------------------------------------------------
----------
--------------------------------------------------------------
----------
--------------------------------------------------------------
----------
-------------
Gw 1 xxx.xx.xxx.xx
5060
Gw_grp:
GRP_ID GRP_NAME
----------
----------------------------------------------------------------
1 VIH
I always get the following error:
CALL: Call to international number
<sip:0004312345586@server.com> from <sip:1004@server.com>
0(23072) LCR: no gateways found m=INVITE
ruri=sip:0004312345586@server.com f=sip:1004@server.com
t=sip:0004312345586@server.com ip=xxx.xx.xxx.xxx
My openser.cfg looks like this:
if (uri=~"sip:0[0-9]+@.*")
{
#authorize if a call is going to PSTN
if(!proxy_authorize("", "subscriber"))
{
proxy_challenge("", "0");
return;
};
xlog("L_INFO", "CALL: Call to international number <$ru> from
<$fu>\n");
perl_exec("dialnr");
if(!load_gws())
{
sl_send_reply("500", "Internal server error, unable to
load
phone
gateways");
xlog("L_Info", "LCR: unable to load gateways\n");
exit;
}
if(!next_gw())
{
sl_send_reply("503", "Service not available, no gateways
found");
xlog("L_Info", "LCR: no gateways found m=$rm ruri=$ru f=$fu
t=$tu ip=$si id=$ci\n");
exit;
};
Can you help me?
Thanks and regards
Martin
Disclaimer
The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the
named
addressee(s).
If you are not the intended recipient, or person responsible for
delivering this information to the intended recipient, please notify
the sender immediately. Unless you are the intended recipient or
his/her representative you are not authorized to, and must not, read,
copy, distribute, use or retain this message or any part of it. E-mail
transmission cannot be guaranteed to be secure or
error-free as
information could be intercepted, corrupted, lost, destroyed, arrive
late or incomplete, or contain viruses.