2 Aug
2006
2 Aug
'06
7:48 a.m.
On Wed, August 2, 2006 6:00, Mark Anthony C. Delfin said:
Hello Again,
Is it possible to use AVP with DB integration? That is, storing the
variable
to a file on the server. Thanks.
yes. http://www.openser.org/docs/modules/1.1.x/avpops.html
regards
klaus
On 7/31/06, Greg Fausak <lgfausak(a)gmail.com> wrote:
Mark,
I think that is what Klaus was suggesting.
First, copy the 'To' URI into an AVP (this holds the value)
Then, copy the AVP to the RURI (request URI). It's a two
step process.
I agree with Klaus, this is weird :-) But, entirely doable.
-g
On 7/31/06, Mark Anthony C. Delfin <markanthonycdelfin(a)gmail.com> wrote:
proxy
is
--
Greg Fausak
greg(a)thursday.com
Hello Klaus,
Thanks for the reply. Is it possible to rewrite the request URI based
from
the TO header for calls to be forwarded there?
On 7/31/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
> Hi Mark!
>
> First, routing based on the To header violates the RFC3261, and is
> usually an indicator that either your setup or your SIP hardware is
> non-optimal.
>
> If you still want to do it, you can copy the URI in the To header in
an
> AVP (check the list of available pseudo
variables, there is a pseudo
> variable for the To URI I guess) with avp_write. Then push this AVP
into
> the request URI using avp_pushto.
>
> regards
> klaus
>
> Mark Anthony C. Delfin wrote:
> > Hello Guys,
> >
> > Just like to request assistance in trying to figure out how can I
route
> > the call from SER as seen on TO header.
Below is the snippet of
the
sip
log:
SIP/2.0
>
>
> 0(20457) DEBUG: get_hdr_field: <To> [34]; uri=[
> sip:8810844@24.90.219.179:8700]
> 0(20457) DEBUG: to body [<sip:8810844@24.90.219.179:8700>
> ]
> 0(20457) get_hdr_field: cseq <CSeq>: <1154241348> <INVITE>
> 0(20457) DEBUG:maxfwd:is_maxfwd_present: value = 70
> 0(20457) DBG:maxfwd:process_maxfwd_header: value 70
decreased to 16
> > 0(20457) check_via_address(10.10.10.21 <http://10.10.10.21>,
> > 10.10.10.21 <http://10.10.10.21>, 0)
> > 0(20457) Sending:
> > INVITE sip:8810844@10.10.10.86 <mailto:sip:8810844@10.10.10.86> > Via:
SIP/2.0/UDP 10.10.10.86 <http://10.10.10.86 >;branch=0
> Via: SIP/2.0/UDP 10.10.10.21 <http://10.10.10.21>
> ;branch=z9hG4bK13666f91365343
> From: <sip:2589@mandela>;tag=cba-0094-44cc5343
> To: <sip:8810844@24.90.219.179:8700>
> Call-ID:
317e120dd2385173-0094-44cc5343-282c(a)10.10.10.21
> <mailto:
317e120dd2385173-0094-44cc5343-282c(a)10.10.10.21>
> > CSeq: 1154241348 INVITE
> > Contact: <sip:2589@10.10.10.21 <mailto:sip: 2589(a)10.10.10.21>>
> > Date: Sun, 30 Jul 2006 06:35:47 GMT
> > User-Agent: BRSIP v2.0.0.11
> > Max-Forwards: 16
> > Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, SUBSCRIBE, NOTIFY
> > Allow-Events: keep-alive, message-summary
> > Supported: timer
> > Session-Expires: 1800
> > Min-SE: 600
> > Expires: 300
> > Content-Type: application/sdp
> > Content-Length: 220
> >
> > v=0
> > o=BRSDP 177 177 IN IP4 10.10.10.21 <http://10.10.10.21>
> > s=BRSDP Session
> > c=IN IP4 10.10.10.21 <http://63.116.254.21 >
> > t=0 0
> > m=audio 15000 RTP/AVP 4 18 101
> > a=rtpmap:4 G723/8000
> > a=rtpmap:18 G729/8000
> > a=rtpmap:101 telephone-event/8000
> > a=fmtp:101 0-15
> >
> > I need SER to send the call based on the TO HEADER URI seen on
> > get_hdr_field. This value changes depending on what another sip > > sending to the SER. The t_relay is not
working as i like it to
behave.
> Any
help is greatly appreciated. Thanks in advance.
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users