4 Aug
2003
4 Aug
'03
6:55 a.m.
try this:
http://www.iptel.org/ser/doc/prerelease/x1026.html#AEN1032
-----Original Message-----
From: Dave Cotton [mailto:dcotton@linuxautrement.com]
Sent: Monday, August 04, 2003 12:52 PM
To: Serusers List
Subject: Re: [Serusers] Relaying to PSTN
On Mon, 2003-08-04 at 12:29, Daniel-Constantin Mierla wrote:
Hello,
check if you have tm and print modules loaded (if you use
the same piece
of config as below). Otherwise, send us line 124
from your
config file.
Daniel
Effectively that was my line 124
>t_relay_to( "192.168.0.2",
"5060")
But since I mailed the list I've found a reference to
t_relay_to_udp, if
I use that I no longer get this error, and ser starts with 24
processes
accompanied by 48 mysql processes, having never seen ser working
correctly so I have no idea if this is supposed to happen.
Now I get good old 483 too many hops.
--
Dave Cotton <dcotton(a)linuxautrement.com>
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers