[SR-Users] rtpproxy module question

Hello, we are using an RTP Proxy from rtpproxy.org as media relay to establish communication between our mobile phones. Of course, we are using the kamailio rtpproxy module to modify the SDP payload and control the proxy. In our Kamailio configuration, we have 1 kamailio configured as Proxy and one kamailio configured as Registrar. So calls go through the Proxy and then to the Registrar who will update the SDP header and select an available rtp proxy. We have noticed that sometimes, the rtp udp flow between the phones isn't routed properly by the rtpproxies, ending in the communication drop (all the SIP nego is working well, and the SDP are correctly patched with the rtp proxy address and port). Analyzing the RTP proxy packets, we have found that the Kamailio registrar gives the Kamailio proxy ip address in the RTP proxy create session command, but keeps the original sdp port. command looks like this: Uc96,101 DC -PbO~Wnm <proxy_ip> <port from original sdp phone packet> PZU5OITCW;1 We are using rtpproxy_manage() without any flags. It seems to us that this ip and port are used as default forward route as long as the callee hasnt connected to the rtpproxy. *Is it correct? * If its true, Its seems to us that this cant work as we are mixing the proxy sip address with a udp port open on the phone ? *Is our analysis correct ?* Can we use some option in rtpproxy_manage to replace the proxy ip by the phone ip as seen in the via route ? Thx for your help Giovanni -- View this message in context: http://sip-router.1086192.n5.nabble.com/rtpproxy-module-question-tp148850.h… Sent from the Users mailing list archive at Nabble.com.