[SR-Users] Troubleshooting acc_radius module with 5.7

Hi community, I am preparing a setup of Kamailio with radius accounting on a docker-compose environment. When configuring the acc_radius module I had to navigate through some old doc by Daniel and inspecting the code itself. The thing is that it seems working, but not. And, yes, I already trying without docker :) Context: two containers, host newtork, to keep it simple - one with kamailio + modules (acc, acc_radius with rad_cli) + radius client configuration - another with freeradius + radius client configuration. I ensure that all data correspond and radius config is fine and spin them up. Run some radius commands to test and let's try some accounting... Executing a failed call and triggering the account flag method, I receive an opaque -1 error from the module: ``` kamailio-1 | 1(20) INFO: {1 22 INVITE yutncivdtflvzga@PT-96} <script>: Initial requests kamailio-1 | 1(20) INFO: {1 22 INVITE yutncivdtflvzga@PT-96} <script>: FLAG FLT_ACC set kamailio-1 | 1(20) NOTICE: {1 22 INVITE yutncivdtflvzga@PT-96} acc [acc.c:286]: acc_log_request(): ACC: call missed: timestamp=1709746392;method=INVITE;from_tag=wvaqi;to_tag=1a86669fc745788378faa461e7993953-78550000;call_id=yutncivdtflvzga@PT-96;code=404;reason=Not Found;src_user=1000;src_domain=kamailio-local;src_ip=172.20.0.1;dst_ouser=1001;dst_user=1001;dst_domain=kamailio-local kamailio-1 | 1(20) ERROR: {1 22 INVITE yutncivdtflvzga@PT-96} acc_radius [acc_radius_mod.c:497]: acc_radius_send_request(): Radius accounting - ERROR - result: -1 ``` Log accounting is working ok, but radius accounting not. Time for troubleshooting. I tried to enable client debugging, but the module does not respond. So I modify the source directly... tested with `radclient` , `radtest`, `radsniff`... all seems to work when trying manually... I also used an internal radcli fuction `rc_check()` and it works. Meanwhile, I was unable to make it work with the module and the radcli library. So another log output using internal functions to debug the configuration: ``` kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: nas-identifier, Valor: radius-wac kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: authserver, Valor: radius kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: acctserver, Valor: radius kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:306]: check_cfg(): Clave: servers, Valor: /usr/local/etc/radcli/servers - OK file found kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:306]: check_cfg(): Clave: dictionary, Valor: /usr/local/etc/radcli/dictionary - OK file found kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:300]: check_cfg(): Clave: default_realm, Valor: -- not set -- kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: radius_timeout, Valor: 10 kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: radius_retries, Valor: 3 kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: bindaddr, Valor: * kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:312]: check_cfg(): Clave: clientdebug, Valor: 1 kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:369]: init_acc_rad(): RC_ACCT_INIT: rc_test_config looks good kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:375]: init_acc_rad(): RC_ACCT_INIT: Config applyed ok ``` The configuration seems ok, accepted by the library and seems to be applied properly, but when trying to parse its values... all seems like rubish... ``` kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:401]: init_acc_rad(): RC_ACCT_INIT: Name: P�y:^ kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:402]: init_acc_rad(): RC_ACCT_INIT: Max 1 kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:403]: init_acc_rad(): RC_ACCT_INIT: Port: 125489528 kamailio-1 | 0(18) INFO: acc_radius [acc_radius_mod.c:404]: init_acc_rad(): RC_ACCT_INIT: Secret: kamailio-1 | 0(18) ERROR: acc_radius [acc_radius_mod.c:410]: init_acc_rad(): RC_CLIENTDEBUG: No clientdebug specified ``` I'm using `libradcli4 1.2.11-1+b2` for running on the container and `libradcli-dev 1.2.11-1build1` for compiling. Open to hear ideas, somebody using it actively on latest 5.7 release? Some updated documentation flying around? I was thinking to open a GitHub issue to handle the documentation issue. Thanks in advance!