21 Feb
2006
21 Feb
'06
3:27 a.m.
unplug wrote:
I have 2 questions about the port using in openser
with NAT enabled.
Q1. Can I using another port number instead of 5060?
yes
I have tried to change the setting in configuration file. Below is a
part of configuration file with NAT enabled.
...
port=6060
...
if (method=="INVITE" && client_nat_test("3")) {
# INSERT YOUR IP ADDRESS HERE
record_route_preset("203.193.26.234:6060;nat=yes");
I guess this might cause problems. Let openser automatically detect the
correct IP address for record routing.
record_route();
add_rr_param(";nat=yes");
} else if (method!="REGISTER") {
record_route();
};
Sip phone (UA1) can register in openser successfully. But in the
location table, I have the contact and received field still using port
5060.
sip:871966806561@10.0.0.46:5060 | sip:210.184.23.31:5060
These are the IP addresses, sockets and ports used by the client. It
means the client is SENDING from port 5060.
To see the socket on which the REGISTER request was received, take a
look at the "socket" column in the location table.
As a result, UA1 failed to make a call as the port is
not the one we want.
Q2. How can I set multiple port for an openser if another port can be
used instead of 5060?
Say I want openser listen to 3 ports, ie 5060, 6060, 7060.
listen=tcp:83.1.3.6:5060
listen=udp:83.1.3.6:5060
listen=udp:83.1.3.6:6060
listen=udp:83.1.3.6:7060
listen=tls:83.1.3.6:5061
regards
klaus