30 Jan
2004
30 Jan
'04
8:22 p.m.
Set modparam("usrloc", "use_domain", "1"). 0.8.13 is the
development
branch and that's work in progress so don't expect things always work as
expected. I do not recomment using the unstable branch.
Jan.
On 30-01 17:42, Andres wrote:
Hi,
In 0.8.13 the location table stores values as "username@domain" in the
username column, but in previous versions it was just "username". Is
there is a config parameter to switch between one format and the other?
And the "serctl ul show <username>" never finds anyone, even though the
"serctl ul show" command clearly shows them there. For example:
serctl ul show 1040(a)sip.telesip.net
404 Username 1040 in table location not found
and....
serctl ul show....
...Record(0x422be248)...
domain: 'location'
aor : '1040(a)sip.telesip.net'
~~~Contact(0x422be2b8)~~~
domain : 'location'
aor : '1040(a)sip.telesip.net'
Contact: 'sip:1040@200.118.1.1:5060;user=phone;transport=udp'
Expires: 594
q : 0.00
Call-ID: '1436722947(a)200.118.1.1'
CSeq : 63
replic : 0
State : CS_DIRTY
Flags : 0
next : (nil)
prev : (nil)
~~~/Contact~~~~
Is there anything obvious I am missing here?
Thanks,
--
Andres
Network Admin
http://www.telesip.net
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers