Hi, In 0.8.13 the location table stores values as "username@domain" in the username column, but in previous versions it was just "username". Is there is a config parameter to switch between one format and the other? And the "serctl ul show <username>" never finds anyone, even though the "serctl ul show" command clearly shows them there. For example: serctl ul show 1040(a)sip.telesip.net 404 Username 1040 in table location not found and.... serctl ul show.... ...Record(0x422be248)... domain: 'location' aor : &#39;1040(a)sip.telesip.net&#39; ~~~Contact(0x422be2b8)~~~ domain : 'location' aor : &#39;1040(a)sip.telesip.net&#39; Contact: 'sip:1040@200.118.1.1:5060;user=phone;transport=udp' Expires: 594 q : 0.00 Call-ID: &#39;1436722947(a)200.118.1.1&#39; CSeq : 63 replic : 0 State : CS_DIRTY Flags : 0 next : (nil) prev : (nil) ~~~/Contact~~~~ Is there anything obvious I am missing here? Thanks, -- Andres Network Admin http://www.telesip.net _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers