25 Jul
2008
25 Jul
'08
12:43 p.m.
Anyone on this?
thnx
---------- Forwarded message ----------
From: David Villasmil <david.villasmil.work(a)gmail.com>
Date: Thu, Jul 24, 2008 at 4:36 PM
Subject: Re: [OpenSER-Users] About openser redirect - forward
To:
Cc: openser users <users(a)lists.openser.org>
Thanks for replying, I still can't get it to work, my routing says:
if($au=~"^5.*"){
$ru = "IP_OF_NEW_SERVER";
sl_send_reply("302", "Redirect to SIP provider");
exit;
}
I want all customers with numbers starting with 5 to register and call
through another server completely... I see this in my box:
18.965383 10.0.1.2 -> SERVER_1_IP SIP Request: REGISTER sip:
sip99.yip.com
19.139214 SERVER_1_IP -> 10.0.1.2 SIP Status: 100 Trying (0
bindings)
19.140477 SERVER_1_IP -> 10.0.1.2 SIP Status: 401 Unauthorized (0
bindings)
19.142207 10.0.1.2 -> SERVER_1_IP SIP Request: REGISTER sip:
sip99.yip.com
19.321262 SERVER_1_IP -> 10.0.1.2 SIP Status: 302 Redirect to SIP
provider (0 bindings)
But I never see a REGISTER on my other box. I've tried with Twinkle, SJPhone
and Eyebeam... all of them show "redirect" when trying to register but I
don't see them trying to register on the other box (NEW_SERVER)
thanks a lot!
David
On Thu, Jul 24, 2008 at 3:29 PM, Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
There is a typo with reply function -- the name is
sl_send_reply(...) in
the sl module.
Cheers,
Daniel
On 07/24/08 22:23, David Villasmil wrote:
Iñaki,
I tried redirecting with your syntax
$ru = "sip.voipstunt.com <http://sip.voipstunt.com/>";
send_reply("302", "Redirect to SIP provider");
exit;
but i get an erro
"unknown command, missing loadmodule?"
I can't figure out what module I should load, I tried uac_redirect but
that's not it.
thanks
David
On Fri, Jun 20, 2008 at 6:00 PM, Iñaki Baz Castillo <ibc(a)aliax.net<mailtomailto:
ibc(a)aliax.net>> wrote:
El Viernes, 20 de Junio de 2008, Valerio Di Marino escribió:
No, it's not possible. When a UAAC receives a 302 it generates a
completely
new request with destination the URI of the "Contact" in the 302.
If a UAC receives a 302 it will generate a new INVITE. If the UAC
has not
configured your OpenSer as outbound proxy, the new INVITE it
generates will
go directly to the SIP provider, so it's not possible your OpenSer
makes fix
the NAT (fix "Contact" and so).
But maybe your SIP provider makes fix the NAT by itself, or you
can try STUN
in your UAC's.
contact the
<http://sip.voipstunt.com>
Something like:
$ru = "sip.voipstunt.com <http://sip.voipstunt.com>";
send_reply("302", "Redirect to SIP provider");
exit;
--
Iñaki Baz Castillo
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
http://www.asipto.com
Thanks for your answer.
Ok, but next time continue the thread in the maillist ;)
2008/6/20 Iñaki Baz Castillo ibc(a)aliax.net
<mailto:ibc@aliax.net>:
AFAIK if
a UAC is redirected it will not include the already used
credentials
in the new request to the new destination (maybe I'm wrong).
Do you think is possible to force using the pseudovariables ? > If you need solving NAT in your OpenSer then
you need to
forward the
request
in it after make fix NAT.
How ? Can explain better ? If not
you could use forwarding or redirect.
With redirect, openser will send an address and the uer will new address: is it correct ? (I am not shure).
Yes, OpenSer replies a 302 with the new URI in the "Contact" header.
> In OpenSer to get a redirection you must set
the RURI ($ru =
...) and
reply a
302 to the user.
Can you send ma a routine syntax ?
For example, I would redirect to sip.voipstunt.com