You may want to set type=peer in the [ser] section. Also , I assume you have a Dial statement in your 'proxy' context in the dialplan. You need that to connect the 2 users. We have no problems using Asterisk as a sip server with ser or openser as the registrar and proxy. I think there are many using this kind of setup so it does work.
Mark
On 9/29/05, Iqbal iqbal@gigo.co.uk wrote:
whats is sip debug on asterisk showing
Bogdan-Andrei Iancu wrote:
Hi Matt,
I redirected this email on the users mailing list - it's more appropriate.
the idea seams ok, with couple of comments:
- be sure that fwd to localhost is ok (instead of a routable IP)
- doing Record-Route may be a good think.
to debug tour problem, add some log("...") statements into your script to be able to trace the processing. Also a network trace (including on lo device) will be helpful to see what happens - if the messages are received, if they are sent and where. Also watch the log for potential errors.
regards, bogdan
Matt L. Zhu wrote:
has anyone successfully setup openser as the frontend proxy for asterisk? here is my setup
/etc/asterisk/sip.conf [general] context=default port=5065 bindaddr=0.0.0.0 http://0.0.0.0 srvlookup=yes
[ser] type=user context=proxy host=192.168.0.10 http://192.168.0.10
then i edited openser.cfg to do something like this
if (uri=~"sip:[a-zA-Z.]*@(xxx.xxx.com)|(192.168.0.10)") { forward( localhost, 5065 ); break; };
i connected two sipphones (wengo) in this case to openser, but calls are not going through at all, connecting directly to asterisk works. have anyone worked in this situation?
thanks
Devel mailing list Devel@openser.org http://openser.org/cgi-bin/mailman/listinfo/devel
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users