29 Sep
2005
29 Sep
'05
5:52 p.m.
Hi Matt,
I redirected this email on the users mailing list - it's more appropriate.
the idea seams ok, with couple of comments:
1) be sure that fwd to localhost is ok (instead of a routable IP)
2) doing Record-Route may be a good think.
to debug tour problem, add some log("...") statements into your script
to be able to trace the processing. Also a network trace (including on
lo device) will be helpful to see what happens - if the messages are
received, if they are sent and where. Also watch the log for potential
errors.
regards,
bogdan
Matt L. Zhu wrote:
has anyone successfully setup openser as the frontend
proxy for
asterisk? here is my setup
/etc/asterisk/sip.conf
[general]
context=default
port=5065
bindaddr=0.0.0.0
srvlookup=yes
[ser]
type=user
context=proxy
host=192.168.0.10
then i edited openser.cfg to do something like this
if
(uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)") {
forward( localhost, 5065 );
break;
};
i connected two sipphones (wengo) in this case to openser, but calls
are not going through at all, connecting directly to asterisk works.
have anyone worked in this situation?
thanks
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
29 Sep
29 Sep
6 p.m.
whats is sip debug on asterisk showing
Bogdan-Andrei Iancu wrote:
Hi Matt,
I redirected this email on the users mailing list - it's more
appropriate.
the idea seams ok, with couple of comments:
1) be sure that fwd to localhost is ok (instead of a routable IP)
2) doing Record-Route may be a good think.
to debug tour problem, add some log("...") statements into your script
to be able to trace the processing. Also a network trace (including on
lo device) will be helpful to see what happens - if the messages are
received, if they are sent and where. Also watch the log for potential
errors.
regards,
bogdan
Matt L. Zhu wrote:
has anyone successfully setup openser as the
frontend proxy for
asterisk? here is my setup
/etc/asterisk/sip.conf
[general]
context=default
port=5065
bindaddr=0.0.0.0
srvlookup=yes
[ser]
type=user
context=proxy
host=192.168.0.10
then i edited openser.cfg to do something like this
if
(uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)") {
forward( localhost, 5065 );
break;
};
i connected two sipphones (wengo) in this case to openser, but calls
are not going through at all, connecting directly to asterisk works.
have anyone worked in this situation?
thanks
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
.
7:04 p.m.
You may want to set type=peer in the [ser] section. Also , I assume you have
a Dial statement in your 'proxy' context in the dialplan. You need that to
connect the 2 users. We have no problems using Asterisk as a sip server with
ser or openser as the registrar and proxy. I think there are many using this
kind of setup so it does work.
Mark
On 9/29/05, Iqbal <iqbal(a)gigo.co.uk> wrote:
whats is sip debug on asterisk showing
Bogdan-Andrei Iancu wrote:
Hi Matt,
I redirected this email on the users mailing list - it's more
appropriate.
the idea seams ok, with couple of comments:
1) be sure that fwd to localhost is ok (instead of a routable IP)
2) doing Record-Route may be a good think.
to debug tour problem, add some log("...") statements into your script
to be able to trace the processing. Also a network trace (including on
lo device) will be helpful to see what happens - if the messages are
received, if they are sent and where. Also watch the log for potential
errors.
regards,
bogdan
Matt L. Zhu wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
has anyone successfully setup openser as the
frontend proxy for
asterisk? here is my setup
/etc/asterisk/sip.conf
[general]
context=default
port=5065
bindaddr=0.0.0.0 <http://0.0.0.0>
srvlookup=yes
[ser]
type=user
context=proxy
host=192.168.0.10 <http://192.168.0.10>
then i edited openser.cfg to do something like this
if
(uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)") {
forward( localhost, 5065 );
break;
};
i connected two sipphones (wengo) in this case to openser, but calls
are not going through at all, connecting directly to asterisk works.
have anyone worked in this situation?
thanks
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
.
8:22 p.m.
in my dialplan, i have this
[proxy] # same as the context in sip.conf
exten => 4005.,1,Dial(SIP/${EXTEN}(a)192.168.0.10)
i am new to asterisk, how can i make it so the exten will route the call to
the other sipphone connected to the ser proxy.
i really want to achieve sipphone->ser->asterisk->ser->sipphone when a phone
calls another. just getting confused how exten will reroute to ser again.
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Mark Aiken
&lt;aiken.mark(a)gmail.com&gt;</i><br>Reply-Tot;/i><br>Reply-To: <i>Mark
Aiken &lt;aiken.mark(a)gmail.com&gt;</i><br>To;gt;</i><br>To: <i>Iqbal
&lt;iqbal(a)gigo.co.uk&gt;</i><br>CC;gt;</i><br>CC: <i>Bogdan-Andrei Iancu
&lt;bogdan(a)voice-system.ro&gt;tem.ro>, "Matt L. Zhu"
&lt;coder0000(a)hotmail.com&gt;il.com>, users(a)openser.org</i><br>Subjectr>Subject:
<i>Re:
[Users] Re: [Devel] openser and asterisk</i><br>Date: <i>Thu, 29 Sep
2005
12:04:21 -0500</i><br>
<br>You may want to set type=peer in the [ser] section. Also , I assume you
have a Dial statement in your 'proxy' context in the dialplan. You need
that to connect the 2 users. We have no problems using Asterisk as a
sip server with ser or openser as the registrar and proxy. I think
there are many using this kind of setup so it does work.<br>
<br>
Mark<br><br><div><span class="gmail_quote">On 9/29/05,
<b
class="gmail_sendername">Iqbal</b> <<a
href="mailto:iqbal@gigo.co.uk">iqbal@gigo.co.uk</a>>
wrote:</span><blockquote class="gmail_quote" style="margin:0pt 0pt
0pt
0.8ex;padding-left:1ex">
whats is sip debug on asterisk showing<br><br>Bogdan-Andrei Iancu
wrote:<br><br>> Hi Matt,<br>><br>> I
redirected this email on the
users mailing list - it's more<br>>
appropriate.<br>><br>> the idea
seams ok, with couple of comments:
<br>> 1) be sure that fwd to localhost is ok (instead of a routable
IP)<br>> 2) doing Record-Route may be a good
think.<br>><br>> to
debug tour problem, add some log("...") statements into your
script
<br>> to be able to trace the processing. Also a network trace (including
on<br>> lo device) will be helpful to see what happens - if the messages
are<br>> received, if they are sent and where. Also watch the log for
potential
<br>> errors.<br>><br>> regards,<br>>
bogdan<br>><br>><br>><br>> Matt L. Zhu
wrote:<br>><br>>> has anyone successfully setup openser
as the
frontend proxy for<br>>> asterisk? here is my setup
<br>>><br>>>
/etc/asterisk/sip.conf<br>>>
[general]<br>>> context=default<br>>>
port=5065<br>>>
bindaddr=<a
href="http://0.0.0.0">0.0.0.0</a><br>>>
srvlookup=yes<br>>><br>>> [ser]
<br>>> type=user<br>>>
context=proxy<br>>> host=<a
href="http://192.168.0.10">192.168.0.10</a><br>>><br>>>
then i
edited openser.cfg to do something like
this<br>>><br>>>
if
<br>>>
(uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)")
{<br>>> forward(
localhost, 5065 );<br>>>
break;<br>>>
};<br>>><br>>> i connected two sipphones
(wengo) in this
case to openser, but calls<br>>> are not going through at all,
connecting directly to asterisk works.
<br>>> have anyone worked in this
situation?<br>>><br>>>
thanks<br>>><br>>><br>>><br>>>
_______________________________________________<br>>> Devel mailing
list<br>>>
<a
href="mailto:Devel@openser.org">Devel@openser.org</a><br>>>
<a
href="http://openser.org/cgi-bin/mailman/listinfo/devel">http:…
_______________________________________________
<br>> Users mailing list<br>> <a
href="mailto:Users@openser.org">Users@openser.org</a><br>>
<a
href="http://openser.org/cgi-bin/mailman/listinfo/users">http:…
<br>>
.<br>><br><br>_______________________________________________<br>Users
mailing list<br><a
href="mailto:Users@openser.org">Users@openser.org</a><br><a
href="http://openser.org/cgi-bin/mailman/listinfo/users">http:…
</a><br></blockquote></div><br>
<br></font></BLOCKQUOTE>
8:59 p.m.
Matt,
You must have user=peer (I think friend will also work) in the [ser] section
of the sip.conf in order for Asterisk to find and dial that 4005 extension
in your [proxy] context.
That exten should then setup a SIP call to 4005(a)192.168.0.10 for an incoming
RURI of 4005@xxxxxxxxxx. Assuming that IP is SER then SER will need to do a
lookup for that user and domain to find the contact address. The outgoing
RURI to SER for the 2 leg will be 4005(a)192.168.0.10. Your SER setup need to
deal with routing the calls via Asterisk in this way.
A general. complete solution with SER as registrar and proxy and Asterisk as
B2BUA Feature Server for SIP PBX is beyond the scope of this email :). I've
done this for a client under NDA so I cant just publish all of their ser and
Asterisk configs. I dont own them. Perhaps there are other on this list that
are free to publish that sort of very detailed configuration info.
I've found it very difficult to find specific help for difficult problems on
mailing lists. Most of the hard questions go unanswered, likely due to NDAs
and conflicts of interest. A consultant that puts food on the table by
supporting open-source software is unlikely to give his 'product" away for
free.
The SER community seems much better about this and the core developers
answer a lot of hard questions on the various mailing lists.
The "core" developers for Asterisk are Digium and they sell support for a
living so dont expect too much free support. Getting the software for free
is a pretty good bargin , IMO, even if there is no 'free' support.
Mark
On 9/29/05, Matt L. Zhu <coder0000(a)hotmail.com> wrote:
in my dialplan, i have this
[proxy] # same as the context in sip.conf
exten => 4005.,1,Dial(SIP/${EXTEN}(a)192.168.0.10)
i am new to asterisk, how can i make it so the exten will route the call
to
the other sipphone connected to the ser proxy.
i really want to achieve sipphone->ser->asterisk->ser->sipphone when a
phone
calls another. just getting confused how exten will reroute to ser again.
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
#A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Mark Aiken <aiken.mark(a)gmail.com></i><br>Reply-To<br>Reply-To:
<i>Mark
Aiken <aiken.mark(a)gmail.com></i><br>To/i><br>To: <i>Iqbal
<iqbal(a)gigo.co.uk></i><br>CC/i><br>CC: <i>Bogdan-Andrei Iancu
<bogdan(a)voice-system.ro>ro>, "Matt L. Zhu"
<coder0000(a)hotmail.com>om>, users(a)openser.org</i><br>Subjectr>Subject:
<i>Re:
[Users] Re: [Devel] openser and asterisk</i><br>Date: <i>Thu, 29 Sep
2005
12:04:21 -0500</i><br>
<br>You may want to set type=peer in the [ser] section. Also , I assume
you
have a Dial statement in your 'proxy' context in the dialplan. You need
that to connect the 2 users. We have no problems using Asterisk as a
sip server with ser or openser as the registrar and proxy. I think
there are many using this kind of setup so it does work.<br>
<br>
Mark<br><br><div><span class="gmail_quote">On 9/29/05,
<b
class="gmail_sendername">Iqbal</b> <<a
href="mailto:iqbal@gigo.co.uk">iqbal@gigo.co.uk</a>>
wrote:</span><blockquote class="gmail_quote" style="margin:0pt
0pt 0pt
0.8ex;padding-left:1ex">
whats is sip debug on asterisk showing<br><br>Bogdan-Andrei Iancu
wrote:<br><br>> Hi Matt,<br>><br>> I redirected this
email on the
users mailing list - it's more<br>> appropriate.<br>><br>>
the idea
seams ok, with couple of comments:
<br>> 1) be sure that fwd to localhost is ok (instead of a routable
IP)<br>> 2) doing Record-Route may be a good think.<br>><br>>
to
debug tour problem, add some log("...") statements into your
script
<br>> to be able to trace the processing. Also a network trace (including
on<br>> lo device) will be helpful to see what happens - if the messages
are<br>> received, if they are sent and where. Also watch the log for
potential
<br>> errors.<br>><br>> regards,<br>>
bogdan<br>><br>><br>><br>> Matt L. Zhu
wrote:<br>><br>>> has anyone successfully setup openser as the
frontend proxy for<br>>> asterisk? here is my setup
<br>>><br>>> /etc/asterisk/sip.conf<br>>>
[general]<br>>> context=default<br>>>
port=5065<br>>>
bindaddr=<a href="http://0.0.0.0">0.0.0.0
<http://0.0.0.0></a><br>>>
srvlookup=yes<br>>><br>>> [ser]
<br>>> type=user<br>>> context=proxy<br>>>
host=<a
href="http://192.168.0.10">192.168.0.10
<http://192.168.0.10></a><br>>><br>>>
then i
edited openser.cfg to do something like this<br>>><br>>>
if
<br>>>
(uri=~"sip:[a-zA-Z\.]*@(xxx\.xxx\.com)|(192\.168\.0\.10)")
{<br>>> forward(
localhost, 5065 );<br>>> break;<br>>>
};<br>>><br>>> i connected two sipphones (wengo) in this
case to openser, but calls<br>>> are not going through at all,
connecting directly to asterisk works.
<br>>> have anyone worked in this
situation?<br>>><br>>>
thanks<br>>><br>>><br>>><br>>>
_______________________________________________<br>>> Devel mailing
list<br>>>
<a
href="mailto:Devel@openser.org">Devel@openser.org</a><br>>>
<a
href="http://openser.org/cgi-bin/mailman/listinfo/devel">
http://openser.org/cgi-bin/mailman/listinfo/devel</a><br>>&g…
_______________________________________________
<br>> Users mailing list<br>> <a
href="mailto:Users@openser.org">Users@openser.org</a><br>>
<a
href="http://openser.org/cgi-bin/mailman/listinfo/users">
http://openser.org/cgi-bin/mailman/listinfo/users</a><br>>
<br>>
.<br>><br><br>_______________________________________________<br>Users
mailing list<br><a
href="mailto:Users@openser.org">Users@openser.org</a><br><a
href="http://openser.org/cgi-bin/mailman/listinfo/users">
http://openser.org/cgi-bin/mailman/listinfo/users
</a><br></blockquote></div><br>
<br></font></BLOCKQUOTE>
4 Oct
4 Oct
11:52 p.m.
New subject: [Users] openser and jabber
hi,
has anyone successfully implemented the jabber module for openser? i keep on
getting this error the moment i enable jabber.so in openser.cfg
1(0) get_connection(): Inherited open database connections, this is not a
good idea
1(0) db_init(): Could not create a connection
1(0) ERROR: child_init(-2): Error while connecting database
1(0) init_mod_child(): Error while initializing module usrloc
1(0) ERROR: open_uac_fifo: init_child failed
1(0) starting fifo server failed
1(0) XJAB: Unloading module ...
without jabber, everything works fine, here are my parameters.
modparam("jabber", "db_url",
"mysql://root:root@localhost/sip")
modparam("jabber", "jaddress", "192.168.0.4")
modparam("jabber", "jdomain", "192.168.0.4")
modparam("jabber", "proxy", "127.0.0.1:5060
localhost:5060")
please help
5 Oct
5 Oct
10:32 a.m.
New subject: [Users] openser and jabber
Hello,
On 10/05/05 00:52, Matt L. Zhu wrote:
hi,
has anyone successfully implemented the jabber module for openser? i
keep on getting this error the moment i enable jabber.so in openser.cfg
1(0) get_connection(): Inherited open database connections, this is
not a good idea
1(0) db_init(): Could not create a connection
1(0) ERROR: child_init(-2): Error while connecting database
1(0) init_mod_child(): Error while initializing module usrloc
the error comes from the usrloc module. OpenSER was unable to open the
connection to MySQL server. Check the username, password, host and
database you gave to db_url parameter of usrloc module.
Daniel
1(0) ERROR: open_uac_fifo: init_child failed
1(0) starting fifo server failed
1(0) XJAB: Unloading module ...
without jabber, everything works fine, here are my parameters.
modparam("jabber", "db_url",
"mysql://root:root@localhost/sip")
modparam("jabber", "jaddress", "192.168.0.4")
modparam("jabber", "jdomain", "192.168.0.4")
modparam("jabber", "proxy", "127.0.0.1:5060
localhost:5060")
please help
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
5:40 p.m.
New subject: [Users] openser and jabber
hi daniel,
the problem doesn't seem to be usrloc, if i comment out the configuration
associated with jabber, everything is fine, if i uncomment jabber, usrloc
error happens.
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Daniel-Constantin Mierla
&lt;daniel(a)voice-system.ro&gt;</i><br>Reply-Tot;/i><br>Reply-To:
<i>daniel(a)voice-system.ro</i><br>To/i><br>To: <i>"Matt L.
Zhu"
&lt;coder0000(a)hotmail.com&gt;</i><br>CC;gt;</i><br>CC:
<i>users(a)openser.org</i><br>Subject;<br>Subject: <i>Re: [Users] openser and
jabber</i><br>Date: <i>Wed, 05 Oct 2005 11:32:24
+0300</i><br>>Hello,<br>><br>>On 10/05/05
00:52, Matt L. Zhu
wrote:<br>><br>>>hi,<br>>><br>>>has
anyone successfully
implemented the jabber module for openser? <br>>>i keep on getting
this error the moment i enable jabber.so in
<br>>>openser.cfg<br>>><br>>>1(0)
get_connection():
Inherited open database connections, this is <br>>>not a good
idea<br>>>1(0) db_init(): Could not create a
connection<br>>>1(0) ERROR: child_init(-2): Error while connecting
database<br>>>1(0) init_mod_child(): Error while initializing module
usrloc<br>><br>>the error comes from the usrloc module. OpenSER
was
unable to open <br>>the connection to MySQL server. Check the username,
password, host <br>>and database you gave to db_url parameter of usrloc
module.<br>><br>>Daniel<br>><br>>>1(0)
ERROR: open_uac_fifo:
init_child failed<br>>>1(0) starting fifo server
failed<br>>>1(0) XJAB: Unloading module
...<br>>><br>>><br>>>without
jabber, everything works
fine, here are my
parameters.<br>>>modparam("jabber",
"db_url",
"mysql://root:root@localhost/sip")<br>>>modparam("jabber",
"jaddress",
"192.168.0.4")<br>>>modparam("jabber",
"jdomain",
"192.168.0.4")<br>>>modparam("jabber",
"proxy", "127.0.0.1:5060
localhost:5060")<br>>><br>>>please
help<br>>><br>>><br>>><br>>>_______________________________________________<br>>>Users
mailing
list<br>>>Users@openser.org<br>>>http://openser.org/cgi-bin/mailman/listinfo/users<br>>><br></font></BLOCKQUOTE>
6:06 p.m.
New subject: [Users] openser and jabber
i think the issue is usrloc and jabber are trying to share the same
connection and creating an error. if i use dbmode=0 for usrloc, the error
goes away, but i want to use persist database for usrloc as well.. is there
a workaround?
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Daniel-Constantin Mierla
&lt;daniel(a)voice-system.ro&gt;</i><br>Reply-Tot;/i><br>Reply-To:
<i>daniel(a)voice-system.ro</i><br>To/i><br>To: <i>"Matt L.
Zhu"
&lt;coder0000(a)hotmail.com&gt;</i><br>CC;gt;</i><br>CC:
<i>users(a)openser.org</i><br>Subject;<br>Subject: <i>Re: [Users] openser and
jabber</i><br>Date: <i>Wed, 05 Oct 2005 11:32:24
+0300</i><br>>Hello,<br>><br>>On 10/05/05
00:52, Matt L. Zhu
wrote:<br>><br>>>hi,<br>>><br>>>has
anyone successfully
implemented the jabber module for openser? <br>>>i keep on getting
this error the moment i enable jabber.so in
<br>>>openser.cfg<br>>><br>>>1(0)
get_connection():
Inherited open database connections, this is <br>>>not a good
idea<br>>>1(0) db_init(): Could not create a
connection<br>>>1(0) ERROR: child_init(-2): Error while connecting
database<br>>>1(0) init_mod_child(): Error while initializing module
usrloc<br>><br>>the error comes from the usrloc module. OpenSER
was
unable to open <br>>the connection to MySQL server. Check the username,
password, host <br>>and database you gave to db_url parameter of usrloc
module.<br>><br>>Daniel<br>><br>>>1(0)
ERROR: open_uac_fifo:
init_child failed<br>>>1(0) starting fifo server
failed<br>>>1(0) XJAB: Unloading module
...<br>>><br>>><br>>>without
jabber, everything works
fine, here are my
parameters.<br>>>modparam("jabber",
"db_url",
"mysql://root:root@localhost/sip")<br>>>modparam("jabber",
"jaddress",
"192.168.0.4")<br>>>modparam("jabber",
"jdomain",
"192.168.0.4")<br>>>modparam("jabber",
"proxy", "127.0.0.1:5060
localhost:5060")<br>>><br>>>please
help<br>>><br>>><br>>><br>>>_______________________________________________<br>>>Users
mailing
list<br>>>Users@openser.org<br>>>http://openser.org/cgi-bin/mailman/listinfo/users<br>>><br></font></BLOCKQUOTE>
6 Oct
6 Oct
1:51 p.m.
New subject: [Users] openser and jabber
On 10/05/05 19:06, Matt L. Zhu wrote:
i think the issue is usrloc and jabber are trying to
share the same
connection and creating an error. if i use dbmode=0 for usrloc, the
error goes away, but i want to use persist database for usrloc as
well.. is there a workaround?
It should not be a problem to reuse the connection. You can try to have
separate databases for usrloc and for jabber module. What version of
jabber server do you use?
Daniel
[...]
3:49 p.m.
New subject: [Users] openser and jabber
i do use separate databases for xjab and usrloc, usrloc is openser, and jab
using openser_jab. I am using the newest jive messenger server. but that
shouldn't affect the openser starting up. This issue is really frustrating,
and i have been looking all over the map for resolutions, and seems to me
that everyone is either doing jabber with usrloc's db_mode = 0 or not having
jabber at all.
<BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #A0C6E5
2px solid; MARGIN-RIGHT: 0px'><font
style='FONT-SIZE:11px;FONT-FAMILY:tahoma,sans-serif'><hr color=#A0C6E5
size=1>
From: <i>Daniel-Constantin Mierla
&lt;daniel(a)voice-system.ro&gt;</i><br>Reply-Tot;/i><br>Reply-To:
<i>daniel(a)voice-system.ro</i><br>To/i><br>To: <i>"Matt L.
Zhu"
&lt;coder0000(a)hotmail.com&gt;</i><br>CC;gt;</i><br>CC:
<i>users(a)openser.org</i><br>Subject;<br>Subject: <i>Re: [Users] openser and
jabber</i><br>Date: <i>Thu, 06 Oct 2005 14:51:20
+0300</i><br>><br>><br>>On 10/05/05 19:06,
Matt L. Zhu
wrote:<br>><br>>>i think the issue is usrloc and jabber
are trying
to share the same <br>>>connection and creating an error. if i use
dbmode=0 for usrloc, the <br>>>error goes away, but i want to use
persist database for usrloc as <br>>>well.. is there a
workaround?<br>><br>>It should not be a problem to reuse the
connection. You can try to <br>>have separate databases for usrloc and
for jabber module. What <br>>version of jabber server do you
use?<br>><br>>Daniel<br>><br>>>[...]<br>><br></font></BLOCKQUOTE>
6784
days inactive
6791
days old
10 comments
5 participants
participants (5)
-
Bogdan-Andrei Iancu -
Daniel-Constantin Mierla -
Iqbal -
Mark Aiken -
Matt L. Zhu