17 Sep
2019
17 Sep
'19
10:35 a.m.
Hello,
it is not supposed to do any DNS on IPv6 addresses, maybe only if you disabled IPv6
support.
Do you have the debug messages for such case?
Also, what global parameters did you set related to iPv6?
Cheers,
Daniel
September 17, 2019 3:30 PM, "Anthony Alba" <ascanio.alba7(a)gmail.com>
wrote:
Hi Daniel,
In this test environment kamailio (SIP control plane) is IPv4 only;
rtpengine is configured on IPv4/IPv6 interfaces.
When the INVITE+SDP came in, it seems to to try to resolve the address
[2001:...] as a DNS name.
To recap, this was trying an IPv4-control plane with dual-stack media.
On Tue, Sep 17, 2019 at 8:49 PM Daniel-Constantin Mierla
<miconda(a)gmail.com> wrote:
--
Daniel-Constantin Mierla
www.kamailio.org -- www.asipto.com
Hello,
I am not sure what do you mean with:
"""
I have noticed that if Kamailio is IPv4-only and it "sees"
IPv6-addresses(Contact, Via headers??) it will try to resolve the
IPv6-address as a DNS name!
"""
If it just that on the specific deployment Kamailio has to bind on IPv4 and run as an
IPv4
application, or actually you mean that Kamailio does not support IPv6?!?
For the later, Kamailio supports IPv6 for quite long time and should work fine on IPv6
only or
mixed networks.
Cheers,
Daniel
On Tue, Sep 17, 2019 at 3:22 AM Anthony Alba <ascanio.alba7(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users Hi folks,
I'm wondering what you do to pass Apple app store tests (IPv6-only
NAT64/DNS64 scenario) with the iOS app likely to put IPv6 addresses in
the SDP, when Kamailio and your B2BUA(Asterisk, FreeSWITCH,...) are
IPv4-only endpoints.
By "pass" I mean media flowing + SIP working - not sure the app store
gatekeepers would actually test media, but it would be nice to have a
robust solution.
Strictly speaking, this is not a Kamailio's problem but a media
SDP/<your-rtp-proxy-of-choice> problem. But since everything is so
closely intertwined I'm wondering where you choose to the location the
"solution".
I have noticed that if Kamailio is IPv4-only and it "sees"
IPv6-addresses(Contact, Via headers??) it will try to resolve the
IPv6-address as a DNS name!
The Wikipedia article on NAT64 mentions 464XLAT(RFC 6877) and Port
Control Protocol (RFC 7225), but those seem to be deep rabbit-holes...
Cheers
Anthony Alba
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - https://www.asipto.com
https://twitter.com/miconda - https://www.linkedin.com/in/miconda
Kamailio Advanced Training - https://www.asipto.com/u/kat
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users