[Serusers] Radius Authentication help

Sorry if this is a re-post, I did not see it come through the list in the almot 24 hours since I sent it. Could someone please help me with this? I am running SER 0.8.14 and Freeradius 1.0.0. They are on sperate servers, but I can use radiusclient on the SER box and succesfully authenticate a test account on the remote radius box. When my sipura spa-200 trys to register to SER, SER does not appear to be making a request to radius. I have followed the ser-radius how-to, and still no good. Below are my configs and debug. Thank you all for the help that you have given me in the past and hopefully someone can help with this question. Config # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) #fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias=**************** alias=***************** # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/pa.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "sql://ser:*********@***********/ser") # -- auth radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- URI radius params -- modparam("uri_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("uri_radius", "service_type", 10) # -- Group radius params -- modparam("group_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("group_radius", "use_domain", 0) # -- Presence params -- modparam("pa", "default_expires", 3600) # -- Nathelper params -- modparam("nathelper", "natping_interval", 10) # -- Msilo params -- modparam("msilo", "db_url", "sql://ser:********@*********/ser") modparam("msilo", "db_table", "silo") modparam("msilo", "expire_time", 36000) modparam("msilo", "check_time", 20) modparam("msilo", "clean_period", 3) modparam("msilo", "use_contact", 1) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); # I have also tried 1 in place of 0 # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; # }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } SER debug: 6(16294) SIP Request: 6(16294) method: <REGISTER> 6(16294) uri: <sip:192.168.1.119> 6(16294) version: <SIP/2.0> 6(16294) parse_headers: flags=1 6(16294) Found param type 232, <branch> = <z9hG4bK-5579ff0b>; state=16 6(16294) end of header reached, state=5 6(16294) parse_headers: Via found, flags=1 6(16294) parse_headers: this is the first via 6(16294) After parse_msg... 6(16294) preparing to run routing scripts... 6(16294) DEBUG : is_maxfwd_present: searching for max_forwards header 6(16294) parse_headers: flags=128 6(16294) end of header reached, state=9 6(16294) DEBUG: get_hdr_field: <To> [31]; uri=[sip:test@192.168.1.119] 6(16294) DEBUG: to body [test <sip:test@192.168.1.119> ] 6(16294) get_hdr_field: cseq <CSeq>: <170> <REGISTER> 6(16294) DEBUG: is_maxfwd_present: value = 70 6(16294) DEBUG: add_param: tag=79b50153b98e6976 6(16294) end of header reached, state=29 6(16294) parse_headers: flags=256 6(16294) DEBUG: get_hdr_body : content_length=0 6(16294) found end of header 6(16294) find_first_route(): No Route headers found 6(16294) loose_route(): There is no Route HF 6(16294) check_nonce(): comparing [414c90ab7f933a6b3c06a4bbbca22ce39fbf8012] and [414c90ab7f933a6b3c06a4bbbca22ce39fbf8012] 10(16299) MSILO:clean_silo: cleaning stored messages - 20