Hi there.
This problem has been solved. We contacted with the supplier. And they have given us a new firmware for devices that have this problem.
Thanks to all.
2016-06-02 9:47 GMT+03:00 Daniel-Constantin Mierla miconda@gmail.com:
Interesting to know that some devices still can't handle sip spirals...
Cheers, Daniel
On 01/06/16 18:16, Mx R wrote:
Thanks Daniel
modparam("topoh", "mask_callid", 1)
It worked.
2016-05-17 17:53 GMT+03:00 Daniel Tryba d.tryba@pocos.nl:
On Tue, May 17, 2016 at 05:08:45PM +0300, Mx R wrote:
In our network we used several ONT Huawei models. But with one model HUAWEI-EchoLife HG8245 / V1R003C00S205 we have the following problem.
When
connecting to this device in the POTS ports of the two phones. From the first port we can not call to the second and from the second port can
not
call to the first port. On the other ONT Huawei devices, there is no
such
problem. Earlier we had set OpenSIP and this device did not have a
problem.
The problem is likely in the configuration because it works at the
default
settings.
In the past I ran into other devices/PBXs that can't handle the fact there is an outgoing/incoming call with the same callid. You could try the topoh module (with modparam("topoh", "mask_callid", 1))
Beware that it might introduce other problems in some calls scenarios, my prefered solution is to route the call to a b2bua (asterisk) when I detected hairpinning.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://www.asipto.com - http://www.kamailio.orghttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users