Interesting to know that some devices still can't handle sip spirals...

Cheers,
Daniel

On 01/06/16 18:16, Mx R wrote:

Thanks Daniel

modparam("topoh", "mask_callid", 1)

It worked.

2016-05-17 17:53 GMT+03:00 Daniel Tryba <d.tryba@pocos.nl>:

On Tue, May 17, 2016 at 05:08:45PM +0300, Mx R wrote:
> In our network we used several ONT Huawei models. But with one model
> HUAWEI-EchoLife HG8245 / V1R003C00S205 we have the following problem. When
> connecting to this device in the POTS ports of the two phones. From the
> first port we can not call to the second and from the second port can not
> call to the first port. On the other ONT Huawei devices, there is no such
> problem. Earlier we had set OpenSIP and this device did not have a problem.
>
> The problem is likely in the configuration because it works at the default
> settings.

In the past I ran into other devices/PBXs that can't handle the fact
there is an outgoing/incoming call with the same callid. You could try
the topoh module (with modparam("topoh", "mask_callid", 1))

Beware that it might introduce other problems in some calls scenarios,
my prefered solution is to route the call to a b2bua (asterisk) when I
detected hairpinning.

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla
http://www.asipto.com - http://www.kamailio.org
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users