20 Jun
2008
20 Jun
'08
6:46 a.m.
Hi All,
I am using OpenSER as a NAT proxy for asterisk and would like to use it to deliver SIP
'MESSAGES' between clients.
At the moment I have the following configuration however messages are not being sent to
the other clients. Instead they are being passed to asterisk.
I would be very grateful if anyone could point me in the right direction.
Ross
---------- Config --------------
debug=5 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
#*/
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5065
children=4
# --- module loading
mpath="/usr/local/lib64/openser/modules/"
loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "nathelper.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "mi_fifo.so"
# --- setting module parameters
# -- mi_fifo params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("usrloc|auth_db","db_url","<MYSQL CONNECTION
STRING>")
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "nat_bflag", 6)
# -- registrar params --
modparam("registrar|nathelper", "received_avp",
"$avp(i:42)")
# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
# -- rr params --
modparam("rr", "enable_full_lr", 1)
# -- nathelper params ---
modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:7890")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", 7)
modparam("nathelper", "sipping_from",
"sip:<ADDRESS>")
# --- main routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# NAT detection
route(2);
if (!method=="REGISTER")
{
record_route();
}
if (loose_route()) {
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(1);
};
if (uri==myself) {
if (method=="REGISTER") {
if (!www_authorize("", "subscriber")) {
www_challenge("", "0");
exit;
};
if (isflagset(5)) {
# set branch flag -- when someone will call this user
# the INVITE will have branch flag 6 set after lookup("location")
setbflag(6);
# if you want OPTIONS natpings uncomment next
# setbflag(7);
};
save("location");
exit;
};
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
if(method=="MESSAGE")
{
if (!lookup("location"))
{
sl_send_reply("404", "User Offline");
exit;
}
route(4);
}
if (method=="REGISTER")
{
save("location");
}
route(1);
}
route[1] {
if (subst_uri('/(sip:.*);nat=yes/\1/')){
setbflag(6);
};
if (isflagset(5)||isbflagset(6)) {
route(3);
}
if (!t_relay()) {
sl_reply_error();
};
exit;
}
route[2]{
force_rport();
if (nat_uac_test("19")) {
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
};
setflag(5);
};
}
route[3] {
if (is_method("BYE"))
{
unforce_rtp_proxy();
}
else if (is_method("INVITE"))
{
force_rtp_proxy();
t_on_failure("2");
};
if (isflagset(5))
{
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
}
t_on_reply("1");
}
route[4]
{
if (!t_relay())
{
sl_reply_error();
};
exit;
}
failure_route[2] {
if (isbflagset(6) || isflagset(5))
{
unforce_rtp_proxy();
}
}
onreply_route[1]
{
if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])"
&& is_method("INVITE"))
{
force_rtp_proxy();
}
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
if (isbflagset(6)) {
fix_nated_contact();
}
exit;
}
---------- End Config --------------
_________________________________________________________________
http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/