[SR-Users] Kamailio-3.0.3 Config file error

Hi, I made an attempt at installing kamailio-3.0.3 in a box yesterday and ran into a config file error on testing the installation. 0(3232): <core> [cfg.y:3333] parse error in config file /usr/local/etc/kamailio/kamailio.cfg line 24, column 6 : synthax error 0(3232): <core> [cfg.y:3333] parse error in config file /usr/local/etc/kamailio/kamailio.cfg line 74, column 6 : unkown config variable 0(3232): <core> [cfg.y:3333] parse error in config file /usr/local/etc/kamailio/kamailio.cfg line 74, column 7 : For me, this error is unexplainable as i am yet to find anything wrong with the lines in question. ( besides, i did not even touch the lines it says are in error ) But for sake of clearity, please bear with me as i post the Much of the config file as i would like to be corrected and assisted. Thanks in anticipation Anthony. - - - - - - - - - - - - - - - - - - #!KAMAILIO # #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_USRLOCDB # # $Id$ # # Kamailio (OpenSER) SIP Server v3.0 - basic configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: &lt;users(a)lists.kamailio.org&gt; # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using ' #!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: - define WITH_MYSQL # # *** To enable authentication execute: - enable mysql - define WITH_AUTH - add users using 'kamctl' # # *** To enable persistent user location execute: - enable mysql - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enhance accounting execute: - enable mysql - define WITH_ACCDB - add following columns to database !ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; !endif ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!elsedebug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */#auto_aliases=no port=5060 /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" #!endif ####### Modules Section ######## #set module path mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" /* uncomment next line for MySQL DB support */ !ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "uri_db.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!endif /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif