Re: [Users] LCR problem

Hello, Im making tests and its not a LCR problem, its a problem from my GW2, when I use it for first option, it fails too, here you have the ngrep, ClientA --> Proxy --> GW2 (192.168.10.93) (192.168.10.91) (195.219.74.166) Regards The problem is that the BYE request will be handled by your LCR logic. The BYE request should be route in the loose_route block as it is an in-dialog request. Maybe the BYE sent from the gateway is not correct. Please post a ngrep dump (ngrep -t -W byline port 5060) regards klaus Pepe wrote: />/ />/ Im configuring Openser with LCR module and Im having an extrange />/ behavior, I have 2 gateways, GW1(preference1) and GW2(preference2), />/ />/ GW1(pref.1) />/ / \ />/ ClientA --> OpenSer --> Client B />/ \ GW2 (pref.2) / />/ />/ />/ When I call from Client A to Client B using GW1, all works fine, its the />/ same when hang up Client B or Client A, but when GW1 fail(I provoke it />/ changing codec) and use failure route (GW 2) then if Client A hang up />/ all works fine, but the problem is when is Client B who hang up, its />/ like a new conversation, GW 2 send BYE to openser and Openser just send />/ "503 Service Not avilable - No gateways" to GW2, but doesnt send nothing />/ to ClientA, any idea ???? />/ />/ />/ Thx in advance />/ / ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users