30 Sep
2008
30 Sep
'08
2:54 p.m.
"The avps received will be available in openser as: callMaxDur and credit,
where callMaxDur is the maximum duration the user is allowed to be connected
with the destination and credit represents the amount of credit available at
starting of the call. This info can be used later in an bbua able to timeout
calls based on duration.
"
On Tue, Sep 30, 2008 at 4:38 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
Thanks DanB, the problem was solved.
How send BYE when expires credit in conversation?
Thanks.
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 11:19 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Here is an already patched version:
http://frad-cdrtool.sourceforge.net/rlm_digest.c
You should replace your rlm_digest.c with this one and recompile the
server.
DanB
On Tue, Sep 30, 2008 at 4:14 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
I'm using the freeradius 1.1.7, and not
patched the rlm_digest.
Where to find the patch rlm_digest ?
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 11:08 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Diego,
the problem is with your digest module which is sanitizing the parameters
in authentication phase only, therefore the parameters like Username,
Digest-URI are not available in the authorization phase (no way for the
connector to read them).
Did u patch your rlm_digest as per the README.txt? What version of
freeradius are u using?
DanB
On Tue, Sep 30, 2008 at 3:56 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
DanB,
Yes, I changed the kamailio.cfg.
I´m sending the full log of radius attached.
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 10:34 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Diego,
looks like there was no session started at first place.
Did u change the openser.cfg config? You need to add callid into
radius_proxy_authorize so that the callid should be used (example in
README.txt of the freeradius-cdrtool sources).
Also, can u post a full authorize/account_start/account_stop sequence as
logged by "radiusd -X".
DanB
On Tue, Sep 30, 2008 at 3:00 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
Hi DanB,
I updated the CDRTool to version 6.6.8 and freeradius-cdrtool to version
1.2-pre.
I'm getting this log and not doing the Debit.
Sep 30 09:57:22 sipserver1 cdrtool[12948]: DebitBalance
CallId=000d6570-880e0035-39c8f267-5c77e9d2(a)192.168.0.1
From=87001(a)mydomain.com.br
To=sip:00551599998888@mydomain.com.br<sip%3A00551599998888@mydomain.com.br>Gateway=
127.0.0.1 Duration=11
Sep 30 09:57:22 sipserver1 cdrtool[12948]: ConnectFee=0.00 Span=1
Duration=60 DestId=55159 domain=mydomain.com.br Profile=551
Period=weekday Rate=551 Interval=0-24 Cost=0.85/60 Price=0.8500
Sep 30 09:57:22 sipserver1 cdrtool[12948]: Error: session
000d6570-880e0035-39c8f267-5c77e9d2(a)192.168.0.1 for
87001(a)mydomain.com.br does not exist
Thanks.
Diego.
----- Original Message -----
*From:* DanB <danb(a)sms4sip.com>
*To:* Diego Zuaneti Arruda <diego(a)fasternet.com.br>
*Cc:* users(a)lists.kamailio.org
*Sent:* Tuesday, September 30, 2008 5:47 AM
*Subject:* Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for
freeradius-cdrtool
Hi Diego,
you don't need to set anything in Users file. The connector does that
for you dynamically, based on the responses received from cdrtool. Your
configuration will be static and always limit the user to the same call
duration. For more information, see the README file within
freeradius-cdrtool source directory.
Cheers,
DanB
On Mon, Sep 29, 2008 at 10:49 PM, Diego Zuaneti Arruda <
diego(a)fasternet.com.br> wrote:
> Hi all,
>
> How I send to freeradius-cdrtool the maxCallDuration and UserCredit?
> On the /etc/raddb/users I have:
>
> 87001(a)mydomain.com.br Auth-Type := Digest, User-Password ==
> "mypassword"
> Reply-Message = "Authenticated",
> SIP-AVP = "authentic#1",
> SIP-AVP = "callMaxDur:60",
> SIP-AVP = "credit:25"
>
> Is this correct ?
>
>
>
> Thanks.
> Diego.
>
>
> _______________________________________________
> Users mailing list
> Users(a)lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>
>