29 Jun
2011
29 Jun
'11
4:16 p.m.
lcr.reload load the tables to memory and does not print
anything. lcr.dump_[gws|rules] prints what is in memory.
perhaps you didn't set lcr_count. please read whole README carefully.
-- juha
you are right, I guess I did not have the module well configured
From: fborot(a)hotmail.com
To: sr-users(a)lists.sip-router.org
Subject: RE: Questions about LCR module
Date: Tue, 28 Jun 2011 16:48:49 -0400
Thanks Juha
I populated the lcr tables by hand. This is how they look now, I have 2 lcr_ids [1 and 2],
each instance has its own gw. And each instance has its own prefix to match for [4444 and
5555].
The idea is that a call comes in with R-URI 444413051234567, it should match the lcr_id=
200, then it should go out using gw 192.168.169.200 etc
mysql> select * from lcr_gw;
+----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+
| id | lcr_id | gw_name | ip_addr | hostname | port | params |
uri_scheme | transport | strip | tag | flags | defunct |
+----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+
| 1 | 200 | switchvox | 192.168.169.200 | pbx1.mydomain.com | 5060 | none |
1 | 1 | 0 | | 0 | 0 |
| 2 | 201 | switchvox2 | 192.168.169.201 | pbx1.mydomain.net | 5060 | none |
1 | 1 | 0 | | 0 | 0 |
+----+--------+------------+-----------------+-------------------+------+--------+------------+-----------+-------+------+-------+---------+
mysql> select * from lcr_rule;
+----+--------+--------+----------+---------+---------+
| id | lcr_id | prefix | from_uri | stopper | enabled |
+----+--------+--------+----------+---------+---------+
| 1 | 200 | 4444 | | 0 | 1 |
| 2 | 201 | 5555 | | 0 | 1 |
+----+--------+--------+----------+---------+---------+
mysql> select * from lcr_rule_target;
+----+--------+---------+-------+----------+--------+
| id | lcr_id | rule_id | gw_id | priority | weight |
+----+--------+---------+-------+----------+--------+
| 1 | 200 | 1 | 1 | 5 | 1 |
| 2 | 201 | 2 | 2 | 5 | 1 |
+----+--------+---------+-------+----------+--------+
Then I tried the sercmd commands to reload and dump and I do not see the contents o the
screen. Is this how is supposed to work now?. How do I know that the new values are being
loaded into memory w/o restarting kamailio?
I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see
huge differences on the LCR module.
there is a script somewhere (read wiki) that upgrades the tables.
I have these main questions:
1- does lcr_id replaces the grp_id?
not really. lcr_ids denote independent lcr instances.
2- what happened to the fifo commands to add gws etc:
fifo commands to manipulate lcr tables are not supported by me.
-- juha
From: fborot(a)hotmail.com
To: sr-users(a)lists.sip-router.org
Subject: Questions about LCR module
Date: Mon, 27 Jun 2011 17:23:05 -0400
I am trying to port our setup from kamailio 1.4.3 to 3.1.4 and I see huge differences on
the LCR module.
I have these main questions:
1- does lcr_id replaces the grp_id?
2- what happened to the fifo commands to add gws etc:
lcr addgw <gw_name> <ip> <port> <scheme> <transport>
<grp_id> <flags> <tag> <strip>
............... add a gateway with flags, tag and strip ............
................(flags, tag, and strip are optional arguments) .....
lcr rmgw <gw_name> ..........................................................
............... delete a gateway
lcr addroute <prefix> <from> <grp_id> <prio>
.................................
.............. add a route ( use '' to match anything in <from>
)
lcr rmroute <prefix> <from> <grp_id> <prio>
.................................
.............. delete a route
3- it looks like the kamctl fifo lcr reload can not be used anymore, instead I found that
there is a sercmd command that can be used to "show" and "reload"
only the lcr tables
What would be the best way to use this module on this version?
Any help/hint would be greatly appreciated.
thank you
fborot