Hello,
On 10/30/08 01:10, Daniel Corbe wrote:
Guys,
When attempting to pass REGISTER requests up stream I get the
following error messages on the console (below). This also brings up
the question of "what is the best way to simply pass REGISTER requests
on to an upstream registrar?"
Thanks for the help.
-Daniel
REGISTER: NATed client, enabling NAT
Oct 29 18:03:58 [48175] ERROR:tm:t_forward_nonack: no branch for
forwarding
Oct 29 18:03:58 [48175] ERROR:tm:w_t_relay: t_forward_nonack failed
Oct 29 18:03:58 [48175] ERROR:tm:t_forward_nonack: no branch for
forwarding
Oct 29 18:03:58 [48175] ERROR:tm:w_t_relay: t_forward_nonack failed
Oct 29 18:03:59 [48175] CRITICAL:tm:t_should_relay_response:
pick_branch failed (lowest==-1) for code 401
Here's the relevant parts of my ser config;
in route[1]
route[1]
{
...
if (method == "REGISTER")
{
route(2);
}
route(1);
}
route[2]
{
# Check to see if the UAC is trying to UNREGISTER. If not test
# for NAT. If NAT is present, we mark it as such before we save()
# the location, that way flag 6 is always set for NATed UAs.
if (!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
xlog("L_NOTICE", "REGISTER: NATed client, enabling
NAT\n");
setflag(6);
fix_nated_register();
force_rport();
};
# We must handle replies for registrations, for caching and
location
# tracking purposes.
t_on_reply("1");
t_on_failure("1");
# Check for digest
#if (radius_www_authorize(""))
#{
# xlog("L_NOTICE", "REGISTER: No Digest, sending
challenge\n");
# www_challenge("", "0");
# exit;
#}
# Digest was good if we get here
#save("location");
# Relay register to porta
t_relay("216.151.143.69 <http://216.151.143.69>");
}
onreply_route[2]
{
if (status =~ "2[0-9][0-9]")
{
# save("location");
};
}
you need a line with:
exit;
at the end of route[2]. Also, there seem to be looping in route[1] if
you handle non-REGISTER.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com