Hello,
are you still running pua_set_publish() before calling save() of
registrar module?
Try to look at logs with debug=3 when a register is processed.
Cheers,
Daniel
On 26/08/15 10:08, Loic Chabert wrote:
Hello,
SIP is sent over UDP.
I have check (on all interface with tcpdump -i any), and now,
subscription is OK:
- 102 subscribe to 103, but authentication needed
- 102 subscribe to 103 with authentication informations
- kamailio sent a 200OK, with subscription state OK
But when 103 sent a register and complete it, no loopback publish has
been sent, and no notify too.
Regards.
2015-08-26 9:16 GMT+02:00 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>:
Hello,
watch the sip traffic and see if there are retransmissions not
replies as well as look at expires header value for
subscribe/public requests. The reason timeout is somehow related
to the above.
Again, be sure you look at the traffic on all network interfaces.
Is SIP sent over UDP or TCP/TLS?
Cheers,
Daniel
On 25/08/15 16:07, Loic Chabert wrote:
Thanks Daniel,
Yes a subscribe request as been sent by my hardphone,
authentication works, but juste after 200OK, a NOTIFY message as
been sent with this header: Subscription-State:
terminated;reason=timeout
But, on my SQL table "active_watcher", i can see my user (103)
subscribed to 102 dialog events.
Concerning pua_usrloc, all requests PUBLISH from myself are allowed:
if(is_method("PUBLISH") && from_uri==myself)
return;
Do you want any copy of debug message at level 3 ?
Thanks.
Regards.
2015-08-25 12:20 GMT+02:00 Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>>:
Hello,
do you get subscribe requests from users? A NOTIFY is sent
only when there is an active subscription.
Also, be sure you allow traffic on loopback without
authentication -- pua_usrloc may send a publish to same sip
server instance. Running with debug=3 and looking at syslog
should reveal more about what is happening around.
Cheers,
Daniel
On 25/08/15 11:40, Loic Chabert wrote:
Hello everyone,
I'm trying to reproduce BLF's asterisk fonctionnality with
kamailio.
With asterisk, on register, NOTIFY message has been sent to
all suscribed users. So LED became green.
How can i reproduce this function ?
I have try to execute a "pua_set_publish()" on register
route, but it's not work. My led stay "black", and no notify
message has been sent.
I have loaded presence, presence_xml, presence_mwi,
presence_dialoginfo, pua, pua_dialoginfo, pua_usrloc. Any
other module needed ?
Thanks,
Regards.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio -
http://www.asipto.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio -
http://www.asipto.com