21 Apr
2019
21 Apr
'19
8:53 p.m.
The error is clear, we might need to wait until one of the core-devs
replies :/
I’m using IPv6 without an issue, but I do not listen on link-local
addresses...
On Sun, Apr 21, 2019 at 11:19 Juha Heinanen <jh(a)tutpro.com> wrote:
David Villasmil writes:
You didn’t set a protocol, like:
listen=udp:[2a02:1850:1:1::13]:5060
From the wiki:
listen
Set the network addresses the SIP server should listen to. It can be an
IP address, hostname or network iterface id or combination of
protocol:address:port (e.g., udp:10.10.10.10:5060).
Adding the proto does not help, e.g.:
listen=udp:[fe80::6e29:95ff:fe7d:37e6]:5060
gives
Apr 21 21:14:48 salmon /usr/bin/sip-proxy[8567]: ERROR: <core>
[core/udp_server.c:395]: udp_init(): bind(8, 0x7fddbb836fe4, 28) on
FE80:0:0:0:6E29:95FF:FE7D:37E6: Invalid argument
Apr 21 21:14:48 salmon /usr/bin/sip-proxy[8567]: ERROR: <core>
[core/udp_server.c:401]: udp_init(): might be caused by using a link local
address, try site local or global
-- Juha
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users