28 Feb
2006
28 Feb
'06
1:29 p.m.
I use SER fifo from a long time to initiate various requests. It works fine.
But now I noticed that when UA is registered from port other than 5060
and I send some request to fifo (i.e. INVITE), this request will always
be sent to port 5060..
SER is not doing any location lookup on that.
Should I make registrar lookup myself, to check for port number that UA
is registered. And only then send "dst_uri:PORT_NUMBER" to fifo?
Because when I do, it works :-)))
I use ser 0.8.12.
Appreciate to have your advice on that.
--
Regards,
Arek Bekiersz